On Sun, Jun 09, 2019 at 01:04:07AM +0100, Dragan Cvetic wrote:
> Implement a platform driver that matches with xlnx,
> sd-fec-1.1 device tree node and registers as a character
> device, including:
> - SD-FEC driver binds to sdfec DT node.
> - creates and initialise an initial driver dev structure.
> - add the driver in Linux build and Kconfig.
>
> Tested-by: Dragan Cvetic <dragan.cve...@xilinx.com>
> Signed-off-by: Derek Kiernan <derek.kier...@xilinx.com>
> Signed-off-by: Dragan Cvetic <dragan.cve...@xilinx.com>
> ---
> drivers/misc/Kconfig | 12 +++++
> drivers/misc/Makefile | 1 +
> drivers/misc/xilinx_sdfec.c | 118
> ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 131 insertions(+)
> create mode 100644 drivers/misc/xilinx_sdfec.c
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 6b0417b..319a6bf 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -471,6 +471,18 @@ config PCI_ENDPOINT_TEST
> Enable this configuration option to enable the host side test
> driver
> for PCI Endpoint.
>
> +config XILINX_SDFEC
> + tristate "Xilinx SDFEC 16"
> + help
> + This option enables support for the Xilinx SDFEC (Soft Decision
> + Forward Error Correction) driver. This enables a char driver
> + for the SDFEC.
> +
> + You may select this driver if your design instantiates the
> + SDFEC(16nm) hardened block. To compile this as a module choose M.
> +
> + If unsure, say N.
> +
> config MISC_RTSX
> tristate
> default MISC_RTSX_PCI || MISC_RTSX_USB
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index b9affcd..0cb3546 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_OCXL) += ocxl/
> obj-y += cardreader/
> obj-$(CONFIG_PVPANIC) += pvpanic.o
> obj-$(CONFIG_HABANA_AI) += habanalabs/
> +obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
> diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
> new file mode 100644
> index 0000000..75cc980
> --- /dev/null
> +++ b/drivers/misc/xilinx_sdfec.c
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Xilinx SDFEC
> + *
> + * Copyright (C) 2019 Xilinx, Inc.
> + *
> + * Description:
> + * This driver is developed for SDFEC16 (Soft Decision FEC 16nm)
> + * IP. It exposes a char device which supports file operations
> + * like open(), close() and ioctl().
> + */
> +
> +#include <linux/miscdevice.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/poll.h>
> +#include <linux/slab.h>
> +#include <linux/clk.h>
> +
> +static int xsdfec_ndevs;
You should use an idr for this, not just a number you bump up and down.
This will not work properly at all.
Think about this situation:
probe device 0
xsdfec_ndevs = 1
probe device 1
xsdfec_ndevs = 2
remove device 0
xsdfec_ndevs = 0
probe another device
misc device fails due to duplicate name.
thanks,
greg k-h
