This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent clocks are localy declared in the controller) and use .parent_data otherwise. Remove clk input helper and all bypass clocks (declared in probe function) which are no longer used since we are able to use device-tree clock name directly. Signed-off-by: Alexandre Mergnat <[email protected]> --- drivers/clk/meson/gxbb-aoclk.c | 55 +++++++++++++++++----------------- 1 file changed, 27 insertions(+), 28 deletions(-) diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c index 449f6ac189d8..32490e8062e9 100644 --- a/drivers/clk/meson/gxbb-aoclk.c +++ b/drivers/clk/meson/gxbb-aoclk.c @@ -11,8 +11,6 @@ #include "clk-regmap.h" #include "clk-dualdiv.h" -#define IN_PREFIX "ao-in-" - /* AO Configuration Clock registers offsets */ #define AO_RTI_PWR_CNTL_REG1 0x0c #define AO_RTI_PWR_CNTL_REG0 0x10 @@ -31,7 +29,9 @@ static struct clk_regmap _name##_ao = { \ .hw.init = &(struct clk_init_data) { \ .name = #_name "_ao", \ .ops = &clk_regmap_gate_ops, \ - .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk" }, \ + .parent_data = &(const struct clk_parent_data) { \ + .fw_name = "mpeg-clk", \ + }, \ .num_parents = 1, \ .flags = CLK_IGNORE_UNUSED, \ }, \ @@ -52,7 +52,9 @@ static struct clk_regmap ao_cts_oscin = { .hw.init = &(struct clk_init_data){ .name = "ao_cts_oscin", .ops = &clk_regmap_gate_ro_ops, - .parent_names = (const char *[]){ IN_PREFIX "xtal" }, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, .num_parents = 1, }, }; @@ -65,7 +67,7 @@ static struct clk_regmap ao_32k_pre = { .hw.init = &(struct clk_init_data){ .name = "ao_32k_pre", .ops = &clk_regmap_gate_ops, - .parent_names = (const char *[]){ "ao_cts_oscin" }, + .parent_hws = (const struct clk_hw *[]) { &ao_cts_oscin.hw }, .num_parents = 1, }, }; @@ -112,7 +114,7 @@ static struct clk_regmap ao_32k_div = { .hw.init = &(struct clk_init_data){ .name = "ao_32k_div", .ops = &meson_clk_dualdiv_ops, - .parent_names = (const char *[]){ "ao_32k_pre" }, + .parent_hws = (const struct clk_hw *[]) { &ao_32k_pre.hw }, .num_parents = 1, }, }; @@ -127,8 +129,10 @@ static struct clk_regmap ao_32k_sel = { .hw.init = &(struct clk_init_data){ .name = "ao_32k_sel", .ops = &clk_regmap_mux_ops, - .parent_names = (const char *[]){ "ao_32k_div", - "ao_32k_pre" }, + .parent_hws = (const struct clk_hw *[]) { + &ao_32k_div.hw, + &ao_32k_pre.hw + }, .num_parents = 2, .flags = CLK_SET_RATE_PARENT, }, @@ -142,7 +146,7 @@ static struct clk_regmap ao_32k = { .hw.init = &(struct clk_init_data){ .name = "ao_32k", .ops = &clk_regmap_gate_ops, - .parent_names = (const char *[]){ "ao_32k_sel" }, + .parent_hws = (const struct clk_hw *[]) { &ao_32k_sel.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, }, @@ -159,10 +163,12 @@ static struct clk_regmap ao_cts_rtc_oscin = { .hw.init = &(struct clk_init_data){ .name = "ao_cts_rtc_oscin", .ops = &clk_regmap_mux_ops, - .parent_names = (const char *[]){ IN_PREFIX "ext-32k-0", - IN_PREFIX "ext-32k-1", - IN_PREFIX "ext-32k-2", - "ao_32k" }, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "ext-32k-0", }, + { .fw_name = "ext-32k-1", }, + { .fw_name = "ext-32k-2", }, + { .hw = &ao_32k.hw }, + }, .num_parents = 4, .flags = CLK_SET_RATE_PARENT, }, @@ -178,8 +184,10 @@ static struct clk_regmap ao_clk81 = { .hw.init = &(struct clk_init_data){ .name = "ao_clk81", .ops = &clk_regmap_mux_ro_ops, - .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk", - "ao_cts_rtc_oscin" }, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "mpeg-clk", }, + { .hw = &ao_cts_rtc_oscin.hw }, + }, .num_parents = 2, .flags = CLK_SET_RATE_PARENT, }, @@ -208,8 +216,10 @@ static struct clk_regmap ao_cts_cec = { * Until CCF gets fixed, adding this fake parent that won't * ever be registered should work around the problem */ - .parent_names = (const char *[]){ "fixme", - "ao_cts_rtc_oscin" }, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "fixme", }, + { .hw = &ao_cts_rtc_oscin.hw }, + }, .num_parents = 2, .flags = CLK_SET_RATE_PARENT, }, @@ -261,14 +271,6 @@ static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { .num = NR_CLKS, }; -static const struct meson_aoclk_input gxbb_aoclk_inputs[] = { - { .name = "xtal", .required = true, }, - { .name = "mpeg-clk", .required = true, }, - {. name = "ext-32k-0", .required = false, }, - {. name = "ext-32k-1", .required = false, }, - {. name = "ext-32k-2", .required = false, }, -}; - static const struct meson_aoclk_data gxbb_aoclkc_data = { .reset_reg = AO_RTI_GEN_CNTL_REG0, .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), @@ -276,9 +278,6 @@ static const struct meson_aoclk_data gxbb_aoclkc_data = { .num_clks = ARRAY_SIZE(gxbb_aoclk), .clks = gxbb_aoclk, .hw_data = &gxbb_aoclk_onecell_data, - .inputs = gxbb_aoclk_inputs, - .num_inputs = ARRAY_SIZE(gxbb_aoclk_inputs), - .input_prefix = IN_PREFIX, }; static const struct of_device_id gxbb_aoclkc_match_table[] = { -- 2.17.1
