On 31/07/2019 14:14, Guillaume La Roque wrote:
> Adding the devicetree binding documentation for the Amlogic temperature
> sensor found in the Amlogic Meson G12 SoCs.
> the G12A and G12B SoCs are supported.
>
> Signed-off-by: Guillaume La Roque <[email protected]>
> ---
> .../bindings/thermal/amlogic,thermal.yaml | 58 +++++++++++++++++++
> 1 file changed, 58 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> new file mode 100644
> index 000000000000..1e2fe84da13d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Thermal Driver
> +
> +maintainers:
> + - Guillaume La Roque <[email protected]>
> +
> +description: Amlogic Thermal driver
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - amlogic,g12-cpu-thermal
> + - amlogic,g12-ddr-thermal
> + - enum:
> + - amlogic,g12-thermal
Shouldn't be :
compatible:
items:
- enum:
- amlogic,g12-cpu-thermal
- amlogic,g12-ddr-thermal
- const:
- amlogic,g12-thermal
instead ?
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + amlogic,ao-secure:
> + description: phandle to the ao-secure syscon
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - amlogic,ao-secure
> +
> +examples:
> + - |
> + cpu_temp: temperature-sensor@ff634800 {
> + compatible = "amlogic,g12-cpu-thermal",
> + "amlogic,g12-thermal";
> + reg = <0x0 0xff634800 0x0 0x50>;
> + interrupts = <0x0 0x24 0x0>;
> + clocks = <&clk 164>;
> + status = "okay";
> + #thermal-sensor-cells = <1>;
> + amlogic,ao-secure = <&sec_AO>;
> + };
> +...
> \ No newline at end of file
>
