On 2/08/19 8:40 PM, Shirley Her (SC) wrote:
> Fix data read/write error in HS200 mode due to chip DLL lock phase shift
>
> Signed-off-by:Shirley Her<[email protected]>
> ---
> change in V4:
> 1. add a bug fix for V3
>
> change in V3:
> 1. add more explanation in dll_recovery and execute_tuning function
> 2. move dll_adjust_count to O2_host struct
> 3. fix some coding style error
> 4. renaming O2_PLL_WDT_CONTROL1 TO O2_PLL_DLL_WDT_CONTROL1
>
> change in V2:
> 1. use usleep_range instead of udelay
> 2. move dll_adjust_count to sdhci-pci-o2micro.c
>
> chagne in V1:
> 1. add error recovery function to relock DLL with correct phase
> 2. retuning HS200 after DLL locked
> ---
> drivers/mmc/host/sdhci-pci-o2micro.c | 305
> ++++++++++++++++++++++++-----------
> 1 file changed, 208 insertions(+), 97 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c
> b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 186a33d..aee0d15 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -55,9 +55,138 @@
> #define O2_PLL_FORCE_ACTIVE BIT(18)
> #define O2_PLL_LOCK_STATUS BIT(14)
> #define O2_PLL_SOFT_RESET BIT(12)
> +#define O2_DLL_LOCK_STATUS BIT(11)
>
> #define O2_SD_DETECT_SETTING 0x324
>
> +static const u32 dmdn_table[5] = {0x25100000, 0x2B1C0000,
> + 0x2C1A0000, 0x371B0000, 0x35100000};
> +
> +struct o2_host {
> + u8 dll_adjust_count;
> +};
> +
> +static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
> +{
> + ktime_t timeout;
> + u32 scratch32;
> +
> + /* Wait max 50 ms */
> + timeout = ktime_add_ms(ktime_get(), 50);
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
> + if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
> + == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
> + break;
> +
> + if (timedout) {
> + pr_err("%s: Card Detect debounce never finished.\n",
> + mmc_hostname(host->mmc));
> + sdhci_dumpregs(host);
> + return;
> + }
> + udelay(10);
> + }
> +}
> +
> +static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
> +{
> + ktime_t timeout;
> + u16 scratch;
> + u32 scratch32;
> +
> + /* PLL software reset */
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + scratch32 |= O2_PLL_SOFT_RESET;
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
> + udelay(1);
> + scratch32 &= ~(O2_PLL_SOFT_RESET);
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
> +
> + /* PLL force active */
> + scratch32 |= O2_PLL_FORCE_ACTIVE;
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
> +
> + /* Wait max 20 ms */
> + timeout = ktime_add_ms(ktime_get(), 20);
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
> + if (scratch & O2_PLL_LOCK_STATUS)
> + break;
> + if (timedout) {
> + pr_err("%s: Internal clock never stabilised.\n",
> + mmc_hostname(host->mmc));
> + sdhci_dumpregs(host);
> + goto out;
> + }
> + udelay(10);
> + }
> +
> + /* Wait for card detect finish */
> + udelay(1);
> + sdhci_o2_wait_card_detect_stable(host);
> +
> +out:
> + /* Cancel PLL force active */
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + scratch32 &= ~O2_PLL_FORCE_ACTIVE;
> + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
> +}
> +
> +static int sdhci_o2_get_cd(struct mmc_host *mmc)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
> + sdhci_o2_enable_internal_clock(host);
> +
> + return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
> +}
> +
> +static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
Please make a separate patch (i.e. 3 patches total) for moving the existing
functions: sdhci_o2_wait_card_detect_stable, sdhci_o2_enable_internal_clock,
sdhci_o2_get_cd, o2_pci_set_baseclk
> +{
> + u32 scratch_32;
> +
> + pci_read_config_dword(chip->pdev,
> + O2_SD_PLL_SETTING, &scratch_32);
> +
> + scratch_32 &= 0x0000FFFF;
> + scratch_32 |= value;
> +
> + pci_write_config_dword(chip->pdev,
> + O2_SD_PLL_SETTING, scratch_32);
> +}
> +
> +static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host)
> +{
> + ktime_t timeout;
> + u32 scratch32;
> +
> + usleep_range(5000, 6000);
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + if (!(scratch32 & O2_DLL_LOCK_STATUS)) {
> + pr_warn("%s: DLL is still unlocked after wait 5ms\n",
> + mmc_hostname(host->mmc));
> + }
> +
> + /* Detect 1 s */
> + timeout = ktime_add_ms(ktime_get(), 1000);
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + if (!(scratch32 & O2_DLL_LOCK_STATUS))
> + return 0;
> +
> + if (timedout)
> + return 1;
> + }
> +}
> +
> static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
> {
> u16 reg;
> @@ -73,7 +202,6 @@ static void __sdhci_o2_execute_tuning(struct sdhci_host
> *host, u32 opcode)
> int i;
>
> sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200);
> -
> for (i = 0; i < 150; i++) {
> u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>
> @@ -95,12 +223,87 @@ static void __sdhci_o2_execute_tuning(struct sdhci_host
> *host, u32 opcode)
> sdhci_reset_tuning(host);
> }
>
> +/* this function is used to fix o2 dll shift issue */
> +static int sdhci_o2_dll_recovery(struct sdhci_host *host)
> +{
> + int ret = 0;
> + u8 scratch_8 = 0;
> + u32 scratch_32 = 0;
> + struct sdhci_pci_slot *slot = sdhci_priv(host);
> + struct sdhci_pci_chip *chip = slot->chip;
> + struct o2_host *o2_host = sdhci_pci_priv(slot);
> +
> + /* Disable clock */
> + sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
> + while (o2_host->dll_adjust_count < 5) {
> + o2_host->dll_adjust_count++;
So dll_adjust_count will always be at least 1, which means dmdn_table[0] is
never used?
> + /* UnLock WP */
> + ret = pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch_8);
> + if (ret)
> + return ret;
> +
> + scratch_8 &= 0x7f;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> +
> + /* PLL software reset */
> + scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + scratch_32 |= O2_PLL_SOFT_RESET;
> + sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1);
> +
> + ret = pci_read_config_dword(chip->pdev,
> + O2_SD_FUNC_REG4,
> + &scratch_32);
> + /* Enable Base Clk setting change */
> + scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
> + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32);
> + o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]);
> +
> + /* Enable internal clock */
> + scratch_8 = SDHCI_CLOCK_INT_EN;
> + sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
> +
> + if (sdhci_o2_get_cd(host->mmc)) {
> + if (sdhci_o2_wait_dll_detect_lock(host)) {
> + scratch_8 |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writeb(host, scratch_8,
> + SDHCI_CLOCK_CONTROL);
> + ret = 1;
'ret' always gets overwritten
> + goto out;
Please use 'break' instead of 'goto'
> + } else {
> + pr_warn("%s: DLL unlocked when dll_adjust_count
> is %d.\n",
> + mmc_hostname(host->mmc),
> + o2_host->dll_adjust_count);
> + }
> + }
Does it make sense to continue if there is no card at this point?
> + }
> +out:
> + if (o2_host->dll_adjust_count == 5)
> + pr_err("%s: DLL adjust over max times\n",
> + mmc_hostname(host->mmc));
> + /* Lock WP */
> + ret = pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch_8);
> + if (ret)
> + return ret;
> + scratch_8 |= 0x80;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> + return ret;
> +}
> +
> static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> int current_bus_width = 0;
>
> /*
> + * Judge the tuning reason, whether caused by dll shift
> + * If cause by dll shift, should call sdhci_o2_dll_recovery
> + */
> + if (!sdhci_o2_wait_dll_detect_lock(host))
> + sdhci_o2_dll_recovery(host);
> +
> + /*
> * This handler only implements the eMMC tuning that is specific to
> * this controller. Fall back to the standard method for other TIMING.
> */
> @@ -131,24 +334,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host
> *mmc, u32 opcode)
> mmc->ios.bus_width = MMC_BUS_WIDTH_8;
> sdhci_set_bus_width(host, current_bus_width);
> }
> -
> host->flags &= ~SDHCI_HS400_TUNING;
> return 0;
> }
>
> -static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
> -{
> - u32 scratch_32;
> - pci_read_config_dword(chip->pdev,
> - O2_SD_PLL_SETTING, &scratch_32);
> -
> - scratch_32 &= 0x0000FFFF;
> - scratch_32 |= value;
> -
> - pci_write_config_dword(chip->pdev,
> - O2_SD_PLL_SETTING, scratch_32);
> -}
> -
> static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
> {
> int ret;
> @@ -284,92 +473,12 @@ static void sdhci_pci_o2_enable_msi(struct
> sdhci_pci_chip *chip,
> host->irq = pci_irq_vector(chip->pdev, 0);
> }
>
> -static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
> -{
> - ktime_t timeout;
> - u32 scratch32;
> -
> - /* Wait max 50 ms */
> - timeout = ktime_add_ms(ktime_get(), 50);
> - while (1) {
> - bool timedout = ktime_after(ktime_get(), timeout);
> -
> - scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
> - if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
> - == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
> - break;
> -
> - if (timedout) {
> - pr_err("%s: Card Detect debounce never finished.\n",
> - mmc_hostname(host->mmc));
> - sdhci_dumpregs(host);
> - return;
> - }
> - udelay(10);
> - }
> -}
> -
> -static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
> -{
> - ktime_t timeout;
> - u16 scratch;
> - u32 scratch32;
> -
> - /* PLL software reset */
> - scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> - scratch32 |= O2_PLL_SOFT_RESET;
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> - udelay(1);
> - scratch32 &= ~(O2_PLL_SOFT_RESET);
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> -
> - /* PLL force active */
> - scratch32 |= O2_PLL_FORCE_ACTIVE;
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> -
> - /* Wait max 20 ms */
> - timeout = ktime_add_ms(ktime_get(), 20);
> - while (1) {
> - bool timedout = ktime_after(ktime_get(), timeout);
> -
> - scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
> - if (scratch & O2_PLL_LOCK_STATUS)
> - break;
> - if (timedout) {
> - pr_err("%s: Internal clock never stabilised.\n",
> - mmc_hostname(host->mmc));
> - sdhci_dumpregs(host);
> - goto out;
> - }
> - udelay(10);
> - }
> -
> - /* Wait for card detect finish */
> - udelay(1);
> - sdhci_o2_wait_card_detect_stable(host);
> -
> -out:
> - /* Cancel PLL force active */
> - scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> - scratch32 &= ~O2_PLL_FORCE_ACTIVE;
> - sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> -}
> -
> -static int sdhci_o2_get_cd(struct mmc_host *mmc)
> -{
> - struct sdhci_host *host = mmc_priv(mmc);
> -
> - sdhci_o2_enable_internal_clock(host);
> -
> - return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
> -}
> -
> static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
> {
> /* Enable internal clock */
> clk |= SDHCI_CLOCK_INT_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> -
> + sdhci_o2_enable_internal_clock(host);
> if (sdhci_o2_get_cd(host->mmc)) {
> clk |= SDHCI_CLOCK_CARD_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> @@ -395,12 +504,13 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
> {
> struct sdhci_pci_chip *chip;
> struct sdhci_host *host;
> + struct o2_host *o2_host = sdhci_pci_priv(slot);
> u32 reg, caps;
> int ret;
>
> chip = slot->chip;
> host = slot->host;
> -
> + o2_host->dll_adjust_count = 0;
> caps = sdhci_readl(host, SDHCI_CAPABILITIES);
>
> /*
> @@ -687,4 +797,5 @@ const struct sdhci_pci_fixes sdhci_o2 = {
> .resume = sdhci_pci_o2_resume,
> #endif
> .ops = &sdhci_pci_o2_ops,
> + .priv_size = sizeof(struct o2_host),
> };
>
