On Thu, 8 Aug 2019, Zhang Lixu wrote: > Currently, the NO_D3 flag is set in ish_probe(), the intel-ish-ipc driver > puts the ISH into D0i3 when system enter both suspend-to-idle(S0ix) and > suspend-to-mem(S3). These patches are to put the ISH into D3 when system > enter S3 and put the ISH into D0i3 when system enter S0ix. > > I tested these patches on the following platforms: > ISH 5.2: ICL > ISH 5.0: CNL CFL WHL CML > ISH 4.0: GLK > ISH 3.0: KBL > > Test steps: > * Run the IIO Sensor tool to read the accel_3d sensor data > * Run cmd "echo mem > /sys/power/state" to suspend-to-mem > * Press the keyboard to wake up OS. > * Check if the tool can get the sensor data after OS resume. > * Run cmd "echo freeze > /sys/power/state" to suspend-to-idle > * Press the keyboard to wake up OS. > * Check if the tool can get the sensor data after OS resume. > > Test results: > The tool can get the accel_3d sensor data after resuming from both > suspend-to-mem and suspend-to-idle. > > Changes from v1: > * Fix the indentation issue > * Elaborate the reason to remove the NO_D3 flag > * Split the PATCH v1 to three changes, and try to minimize the lines change
Applied to for-5.4/ish. Thanks, -- Jiri Kosina SUSE Labs
