Hi Dan,
Thank you for the update.
On 8/20/19 9:53 PM, Dan Murphy wrote:
> Fix the brightness control for I2C mode. Instead of
> changing the full scale current register update the ALS target
> register for the appropriate banks.
>
> In addition clean up some code errors and random misspellings found
> during coding.
>
> Tested on Droid4 as well as LM3532 EVM connected to a BeagleBoneBlack
>
> Fixes: e37a7f8d77e1 ("leds: lm3532: Introduce the lm3532 LED driver")
> Reported-by: Pavel Machek <[email protected]>
> Signed-off-by: Dan Murphy <[email protected]>
> ---
>
> v3 - Removed register define updates -
> https://lore.kernel.org/patchwork/patch/1114542/
>
> drivers/leds/leds-lm3532.c | 44 ++++++++++++++++++++++++++------------
> 1 file changed, 30 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
> index 646100724971..8132d05f7add 100644
> --- a/drivers/leds/leds-lm3532.c
> +++ b/drivers/leds/leds-lm3532.c
> @@ -38,6 +38,9 @@
> #define LM3532_REG_ZN_2_LO 0x65
> #define LM3532_REG_ZN_3_HI 0x66
> #define LM3532_REG_ZN_3_LO 0x67
> +#define LM3532_REG_ZONE_TRGT_A 0x70
> +#define LM3532_REG_ZONE_TRGT_B 0x75
> +#define LM3532_REG_ZONE_TRGT_C 0x7a
> #define LM3532_REG_MAX 0x7e
>
> /* Contorl Enable */
> @@ -116,6 +119,7 @@ struct lm3532_als_data {
> * @priv - Pointer the device data structure
> * @control_bank - Control bank the LED is associated to
> * @mode - Mode of the LED string
> + * @ctrl_brt_pointer - Zone target register that controls the sink
> * @num_leds - Number of LED strings are supported in this array
> * @led_strings - The LED strings supported in this array
> * @label - LED label
> @@ -126,6 +130,7 @@ struct lm3532_led {
>
> int control_bank;
> int mode;
> + int ctrl_brt_pointer;
> int num_leds;
> u32 led_strings[LM3532_MAX_CONTROL_BANKS];
> char label[LED_MAX_NAME_SIZE];
> @@ -339,8 +344,8 @@ static int lm3532_brightness_set(struct led_classdev
> *led_cdev,
> if (ret)
> goto unlock;
>
> - brightness_reg = LM3532_REG_CTRL_A_BRT + led->control_bank * 2;
> - brt_val = brt_val / LM3532_BRT_VAL_ADJUST;
> + brightness_reg = LM3532_REG_ZONE_TRGT_A + led->control_bank * 5 +
> + (led->ctrl_brt_pointer >> 2);
>
> ret = regmap_write(led->priv->regmap, brightness_reg, brt_val);
>
> @@ -356,8 +361,30 @@ static int lm3532_init_registers(struct lm3532_led *led)
> unsigned int output_cfg_val = 0;
> unsigned int output_cfg_shift = 0;
> unsigned int output_cfg_mask = 0;
> + unsigned int brightness_config_reg;
> + unsigned int brightness_config_val;
> int ret, i;
>
> + if (drvdata->enable_gpio)
> + gpiod_direction_output(drvdata->enable_gpio, 1);
> +
> + brightness_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
> + /*
> + * This could be hard coded to the default value but the control
> + * brightness register may have changed during boot.
> + */
> + ret = regmap_read(drvdata->regmap, brightness_config_reg,
> + &led->ctrl_brt_pointer);
> + if (ret)
> + return ret;
> +
> + led->ctrl_brt_pointer &= LM3532_ZONE_MASK;
> + brightness_config_val = led->ctrl_brt_pointer | led->mode;
> + ret = regmap_write(drvdata->regmap, brightness_config_reg,
> + brightness_config_val);
> + if (ret)
> + return ret;
> +
> for (i = 0; i < led->num_leds; i++) {
> output_cfg_shift = led->led_strings[i] * 2;
> output_cfg_val |= (led->control_bank << output_cfg_shift);
> @@ -382,7 +409,6 @@ static int lm3532_als_configure(struct lm3532_data *priv,
> struct lm3532_als_data *als = priv->als_data;
> u32 als_vmin, als_vmax, als_vstep;
> int zone_reg = LM3532_REG_ZN_0_HI;
> - int brightnes_config_reg;
> int ret;
> int i;
>
> @@ -411,14 +437,7 @@ static int lm3532_als_configure(struct lm3532_data *priv,
> als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
> (als->als_input_mode << LM3532_ALS_SEL_SHIFT));
>
> - ret = regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
> - if (ret)
> - return ret;
> -
> - brightnes_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
> -
> - return regmap_update_bits(priv->regmap, brightnes_config_reg,
> - LM3532_I2C_CTRL, LM3532_ALS_CTRL);
> + return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
> }
>
> static int lm3532_parse_als(struct lm3532_data *priv)
> @@ -634,9 +653,6 @@ static int lm3532_probe(struct i2c_client *client,
> return ret;
> }
>
> - if (drvdata->enable_gpio)
> - gpiod_direction_output(drvdata->enable_gpio, 1);
> -
> return ret;
> }
>
>
Patch set applied.
--
Best regards,
Jacek Anaszewski
