On Wed, Aug 28, 2019 at 10:27 PM Anand Moon <linux.am...@gmail.com> wrote:
>
> As per shematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
typo: "schematics"
> is supplied by VDDIO_AO3V3.
please add a short sentence to the description (since you probably
have to re-send a v2) like:
"While here, move the comment name with the signal name in the
schematics above the gpio property to make it consistent with other
regulators"
> Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> Cc: Jerome Brunet <jbru...@baylibre.com>
> Cc: Neil Armstrong <narmstr...@baylibre.com>
> Signed-off-by: Anand Moon <linux.am...@gmail.com>
with the patch rebased (see below) and the two issues from above addressed:
Reviewed-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 98e742bf44c1..a078a1ee5004 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -67,17 +67,19 @@
> };
>
> tflash_vdd: regulator-tflash_vdd {
> - /*
> - * signal name from schematics: TFLASH_VDD_EN
> - */
> compatible = "regulator-fixed";
>
> regulator-name = "TFLASH_VDD";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
>
> + /*
> + * signal name from schematics: TFLASH_VDD_EN
> + */
> gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> + /* U16 RT9179GB */
> + vin-supply = <&vddio_ao3v3>;
> };
>
> tf_io: gpio-regulator-tf_io {
> @@ -95,6 +97,8 @@
>
> states = <3300000 0
> 1800000 1>;
> + /* U12/U13 RT9179GB */
> + vin-supply = <&vddio_ao3v3>;
> };
thank you for the patch but I think it won't apply on top of Neil's
"arm64: dts: meson: fix boards regulators states format" (which was
applied just after you sent this series)
Martin
