Hi Martin,
Thanks of your review comments.
On Sun, 1 Sep 2019 at 17:11, Martin Blumenstingl
<martin.blumensti...@googlemail.com> wrote:
>
> On Wed, Aug 28, 2019 at 10:27 PM Anand Moon <linux.am...@gmail.com> wrote:
> >
> > As per shematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
> typo: "schematics"
>
Ok
> > is supplied by VDDIO_AO3V3.
> please add a short sentence to the description (since you probably
> have to re-send a v2) like:
> "While here, move the comment name with the signal name in the
> schematics above the gpio property to make it consistent with other
> regulators"
>
Ok I will append this in next version.
> > Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> > Cc: Jerome Brunet <jbru...@baylibre.com>
> > Cc: Neil Armstrong <narmstr...@baylibre.com>
> > Signed-off-by: Anand Moon <linux.am...@gmail.com>
> with the patch rebased (see below) and the two issues from above addressed:
> Reviewed-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
>
> > ---
> > arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > index 98e742bf44c1..a078a1ee5004 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> > @@ -67,17 +67,19 @@
> > };
> >
> > tflash_vdd: regulator-tflash_vdd {
> > - /*
> > - * signal name from schematics: TFLASH_VDD_EN
> > - */
> > compatible = "regulator-fixed";
> >
> > regulator-name = "TFLASH_VDD";
> > regulator-min-microvolt = <3300000>;
> > regulator-max-microvolt = <3300000>;
> >
> > + /*
> > + * signal name from schematics: TFLASH_VDD_EN
> > + */
> > gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
> > enable-active-high;
> > + /* U16 RT9179GB */
> > + vin-supply = <&vddio_ao3v3>;
> > };
> >
> > tf_io: gpio-regulator-tf_io {
> > @@ -95,6 +97,8 @@
> >
> > states = <3300000 0
> > 1800000 1>;
> > + /* U12/U13 RT9179GB */
> > + vin-supply = <&vddio_ao3v3>;
> > };
> thank you for the patch but I think it won't apply on top of Neil's
> "arm64: dts: meson: fix boards regulators states format" (which was
> applied just after you sent this series)
>
>
> Martin
Ok will re-base these changes on linux-next next time.
Best Regards
-Anand
