[PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64

[Katsuhiro Suzuki]

This patch adds audio codec (Everest ES8316) and I2S audio nodes for
RK3399 RockPro64.

Signed-off-by: Katsuhiro Suzuki <katsuh...@katsuster.net>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dts    | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts 
b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 0401d4ec1f45..8b1e6382b140 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -81,6 +81,12 @@
                reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
        };
 
+       sound {
+               compatible = "audio-graph-card";
+               label = "rockchip,rk3399";
+               dais = <&i2s1_p0>;
+       };
+
        vcc12v_dcin: vcc12v-dcin {
                compatible = "regulator-fixed";
                regulator-name = "vcc12v_dcin";
@@ -470,6 +476,20 @@
        i2c-scl-rising-time-ns = <300>;
        i2c-scl-falling-time-ns = <15>;
        status = "okay";
+
+       es8316: codec@11 {
+               compatible = "everest,es8316";
+               reg = <0x11>;
+               clocks = <&cru SCLK_I2S_8CH_OUT>;
+               clock-names = "mclk";
+               #sound-dai-cells = <0>;
+
+               port {
+                       es8316_p0_0: endpoint {
+                               remote-endpoint = <&i2s1_p0_0>;
+                       };
+               };
+       };
 };
 
 &i2c3 {
@@ -505,6 +525,14 @@
        rockchip,playback-channels = <2>;
        rockchip,capture-channels = <2>;
        status = "okay";
+
+       i2s1_p0: port {
+               i2s1_p0_0: endpoint {
+                       dai-format = "i2s";
+                       mclk-fs = <256>;
+                       remote-endpoint = <&es8316_p0_0>;
+               };
+       };
 };
 
 &i2s2 {
-- 
2.23.0.rc1