After a transfer timeout, some faulty I2C slave devices might hold down
the SCL or the SDA pins. We can generate a bus clear command, hoping that
the slave might release the pins.
Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroc...@microchip.com>
---
Changes in v2:
- added '.has_clear_cmd' struct member to specify which IPs support the
clear command; for now, only SAMA5D2 supports it;
- added Ludovic's V1 ack since there were no major changes;
drivers/i2c/busses/i2c-at91-core.c | 8 ++++++++
drivers/i2c/busses/i2c-at91-master.c | 21 +++++++++++++++++++++
drivers/i2c/busses/i2c-at91.h | 7 ++++++-
3 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-at91-core.c
b/drivers/i2c/busses/i2c-at91-core.c
index 435c7d7377a3..cb07489e698f 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -68,6 +68,7 @@ static struct at91_twi_pdata at91rm9200_config = {
.has_unre_flag = true,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_clear_cmd = false,
};
static struct at91_twi_pdata at91sam9261_config = {
@@ -76,6 +77,7 @@ static struct at91_twi_pdata at91sam9261_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_clear_cmd = false,
};
static struct at91_twi_pdata at91sam9260_config = {
@@ -84,6 +86,7 @@ static struct at91_twi_pdata at91sam9260_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_clear_cmd = false,
};
static struct at91_twi_pdata at91sam9g20_config = {
@@ -92,6 +95,7 @@ static struct at91_twi_pdata at91sam9g20_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_clear_cmd = false,
};
static struct at91_twi_pdata at91sam9g10_config = {
@@ -100,6 +104,7 @@ static struct at91_twi_pdata at91sam9g10_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_clear_cmd = false,
};
static const struct platform_device_id at91_twi_devtypes[] = {
@@ -130,6 +135,7 @@ static struct at91_twi_pdata at91sam9x5_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_clear_cmd = false,
};
static struct at91_twi_pdata sama5d4_config = {
@@ -138,6 +144,7 @@ static struct at91_twi_pdata sama5d4_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = true,
+ .has_clear_cmd = false,
};
static struct at91_twi_pdata sama5d2_config = {
@@ -146,6 +153,7 @@ static struct at91_twi_pdata sama5d2_config = {
.has_unre_flag = true,
.has_alt_cmd = true,
.has_hold_field = true,
+ .has_clear_cmd = true,
};
static const struct of_device_id atmel_twi_dt_ids[] = {
diff --git a/drivers/i2c/busses/i2c-at91-master.c
b/drivers/i2c/busses/i2c-at91-master.c
index a3fcc35ffd3b..8082dff77724 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -440,6 +440,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
unsigned long time_left;
bool has_unre_flag = dev->pdata->has_unre_flag;
bool has_alt_cmd = dev->pdata->has_alt_cmd;
+ bool has_clear_cmd = dev->pdata->has_clear_cmd;
/*
* WARNING: the TXCOMP bit in the Status Register is NOT a clear on
@@ -599,6 +600,26 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
at91_twi_write(dev, AT91_TWI_CR,
AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
}
+
+ /*
+ * After timeout, some faulty I2C slave devices might hold SCL/SDA down;
+ * we can send a bus clear command, hoping that the pins will be
+ * released
+ */
+ if (has_clear_cmd && !(dev->transfer_status & AT91_TWI_SDA) ||
+ !(dev->transfer_status & AT91_TWI_SCL)) {
+ dev_dbg(dev->dev,
+ "SDA/SCL are down; sending bus clear command\n");
+ if (dev->use_alt_cmd) {
+ unsigned int acr;
+
+ acr = at91_twi_read(dev, AT91_TWI_ACR);
+ acr &= ~AT91_TWI_ACR_DATAL_MASK;
+ at91_twi_write(dev, AT91_TWI_ACR, acr);
+ }
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_CLEAR);
+ }
+
return ret;
}
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index 499b506f6128..0827c28a84db 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -36,6 +36,7 @@
#define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
#define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
#define AT91_TWI_SWRST BIT(7) /* Software Reset */
+#define AT91_TWI_CLEAR BIT(15) /* Bus clear command */
#define AT91_TWI_ACMEN BIT(16) /* Alternative Command Mode
Enable */
#define AT91_TWI_ACMDIS BIT(17) /* Alternative Command Mode
Disable */
#define AT91_TWI_THRCLR BIT(24) /* Transmit Holding Register
Clear */
@@ -69,6 +70,8 @@
#define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
#define AT91_TWI_EOSACC BIT(11) /* End Of Slave Access */
#define AT91_TWI_LOCK BIT(23) /* TWI Lock due to Frame Errors
*/
+#define AT91_TWI_SCL BIT(24) /* TWI SCL status */
+#define AT91_TWI_SDA BIT(25) /* TWI SDA status */
#define AT91_TWI_INT_MASK \
(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK \
@@ -81,7 +84,8 @@
#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
#define AT91_TWI_ACR 0x0040 /* Alternative Command Register
*/
-#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
+#define AT91_TWI_ACR_DATAL_MASK GENMASK(15, 0)
+#define AT91_TWI_ACR_DATAL(len) ((len) & AT91_TWI_ACR_DATAL_MASK)
#define AT91_TWI_ACR_DIR BIT(8)
#define AT91_TWI_FMR 0x0050 /* FIFO Mode Register */
@@ -108,6 +112,7 @@ struct at91_twi_pdata {
bool has_unre_flag;
bool has_alt_cmd;
bool has_hold_field;
+ bool has_clear_cmd;
struct at_dma_slave dma_slave;
};
--
2.20.1
