[PATCH] net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name

[Wen Yang]

of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.

fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Wen Yang <weny...@linux.alibaba.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Vivien Didelot <vivien.dide...@gmail.com>
Cc: Florian Fainelli <f.faine...@gmail.com>
Cc: "David S. Miller" <da...@davemloft.net>
Cc: net...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/dsa/rtl8366rb.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a268085..f5cc8b0 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -507,7 +507,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi 
*smi)
        irq = of_irq_get(intc, 0);
        if (irq <= 0) {
                dev_err(smi->dev, "failed to get parent IRQ\n");
-               return irq ? irq : -EINVAL;
+               ret = irq ? irq : -EINVAL;
+               goto out_put_node;
        }
 
        /* This clears the IRQ status register */
@@ -515,7 +516,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi 
*smi)
                          &val);
        if (ret) {
                dev_err(smi->dev, "can't read interrupt status\n");
-               return ret;
+               goto out_put_node;
        }
 
        /* Fetch IRQ edge information from the descriptor */
@@ -537,7 +538,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi 
*smi)
                                 val);
        if (ret) {
                dev_err(smi->dev, "could not configure IRQ polarity\n");
-               return ret;
+               goto out_put_node;
        }
 
        ret = devm_request_threaded_irq(smi->dev, irq, NULL,
@@ -545,7 +546,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi 
*smi)
                                        "RTL8366RB", smi);
        if (ret) {
                dev_err(smi->dev, "unable to request irq: %d\n", ret);
-               return ret;
+               goto out_put_node;
        }
        smi->irqdomain = irq_domain_add_linear(intc,
                                               RTL8366RB_NUM_INTERRUPT,
@@ -553,12 +554,15 @@ static int rtl8366rb_setup_cascaded_irq(struct 
realtek_smi *smi)
                                               smi);
        if (!smi->irqdomain) {
                dev_err(smi->dev, "failed to create IRQ domain\n");
-               return -EINVAL;
+               ret = -EINVAL;
+               goto out_put_node;
        }
        for (i = 0; i < smi->num_ports; i++)
                irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
 
-       return 0;
+out_put_node:
+       of_node_put(intc);
+       return ret;
 }
 
 static int rtl8366rb_set_addr(struct realtek_smi *smi)
-- 
1.8.3.1