On Mon, Sep 30, 2019 at 11:27:10AM +0200, Oleksij Rempel wrote:
> Mostly this hardware can work with generic PHY driver, but this change
> is needed to provided interrupt handling support.
> Tested with dsa ar9331-switch driver.
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> drivers/net/phy/at803x.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 6ad8b1c63c34..d62a77adb8e7 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -53,6 +53,7 @@
> #define AT803X_DEBUG_REG_5 0x05
> #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
>
> +#define AR9331_PHY_ID 0x004dd041
> #define ATH8030_PHY_ID 0x004dd076
> #define ATH8031_PHY_ID 0x004dd074
> #define ATH8035_PHY_ID 0x004dd072
Hi Oleksij
I wonder if we should call this ATH9331_PHY_ID, to keep with the
naming convention? Why did you choose AR, not ATH?
Thanks
Andrew
