Hi Neil,
On Mon, 7 Oct 2019 at 19:49, Neil Armstrong <narmstr...@baylibre.com> wrote:
>
> Hi Anand,
>
> On 07/10/2019 15:16, Anand Moon wrote:
> > As per schematics add missing 5V_EN gpio signal to enable
> > VCC5V regulator node.
> >
> > Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
> > Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> > Cc: Jerome Brunet <jbru...@baylibre.com>
> > Cc: Neil Armstrong <narmstr...@baylibre.com>
> > Signed-off-by: Anand Moon <linux.am...@gmail.com>
> > ---
> > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > index 42f15405750c..a9a661258886 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > @@ -94,6 +94,9 @@
> > regulator-max-microvolt = <5000000>;
> > regulator-always-on;
> > vin-supply = <&main_12v>;
> > + /* U12 NB679GD 5V_EN */
> > + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
> > + enable-active-high;
>
> This GPIO is handled by the BL301 SCP firmware, I'm personally against
> adding this to the DT since it's out of control of Linux or any OS.
>
> Neil
>
Thanks for your input.
> > };
> >
> > vcc_1v8: regulator-vcc_1v8 {
> >
>
Best Regards
-Anand
