As per schematics add missing VCCV5 power supply to VDDIO_C/TF_IO
regulator. Also add TF_3V3N_1V8_EN signal name to gpio pin.
Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
Cc: Jerome Brunet <jbru...@baylibre.com>
Cc: Neil Armstrong <narmstr...@baylibre.com>
Signed-off-by: Anand Moon <linux.am...@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 6bd23a1e7e1d..5daf176452f7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -66,11 +66,14 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ /* TF_3V3N_1V8_EN */
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <3300000 0>,
<1800000 1>;
+ /* U16 RT9179GB */
+ vin-supply = <&vcc_5v>;
};
flash_1v8: regulator-flash_1v8 {
--
2.23.0
