On Sun, May 10, 2020 at 12:50:08PM +0300, Serge Semin wrote:
> Modern device tree bindings are supposed to be created as YAML-files
> in accordance with dt-schema. This commit replaces Synopsys DW I2C
> legacy bare text bindings with YAML file. As before the bindings file
> states that the corresponding dts node is supposed to be compatible
> either with generic DW I2C controller or with Microsemi Ocelot SoC I2C
> one, to have registers, interrupts and clocks properties. In addition
> the node may have clock-frequency, i2c-sda-hold-time-ns,
> i2c-scl-falling-time-ns and i2c-sda-falling-time-ns optional properties.
>
> Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
> Cc: Alexey Malahov <alexey.mala...@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbog...@alpha.franken.de>
> Cc: Paul Burton <paulbur...@kernel.org>
> Cc: Ralf Baechle <r...@linux-mips.org>
> Cc: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> Cc: Mika Westerberg <mika.westerb...@linux.intel.com>
> Cc: Wolfram Sang <w...@the-dreams.de>
> Cc: Frank Rowand <frowand.l...@gmail.com>
> Cc: linux-m...@vger.kernel.org
>
> ---
>
> Changelog v2:
> - Make sure that "mscc,ocelot-i2c" compatible node may have up to two
> registers space defined, while normal DW I2C controller will have only
> one registers space.
> - Add "mscc,ocelot-i2c" example to test the previous fix.
> - Declare "unevaluatedProperties" property instead of
> "additionalProperties" one.
> - Due to the previous fix we can now discard the dummy boolean properties
> definitions, since the proper type evaluation will be performed by the
> generic i2c-controller.yaml schema.
> ---
> .../bindings/i2c/i2c-designware.txt | 73 ---------
> .../bindings/i2c/snps,designware-i2c.yaml | 154 ++++++++++++++++++
> 2 files changed, 154 insertions(+), 73 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-designware.txt
> create mode 100644
> Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> deleted file mode 100644
> index 08be4d3846e5..000000000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -* Synopsys DesignWare I2C
> -
> -Required properties :
> -
> - - compatible : should be "snps,designware-i2c"
> - or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
> - - reg : Offset and length of the register set for the device
> - - interrupts : <IRQ> where IRQ is the interrupt number.
> - - clocks : phandles for the clocks, see the description of clock-names
> below.
> - The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
> - clock is optional. If a single clock is specified but no clock-name, it is
> - the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
> -
> -Recommended properties :
> -
> - - clock-frequency : desired I2C bus clock frequency in Hz.
> -
> -Optional properties :
> -
> - - clock-names : Contains the names of the clocks:
> - "ic_clk", for the core clock used to generate the external I2C clock.
> - "pclk", the interface clock, required for register access.
> -
> - - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA
> hold
> - time, named ICPU_CFG:TWI_DELAY in the datasheet.
> -
> - - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
> - This option is only supported in hardware blocks version 1.11a or newer
> and
> - on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
> -
> - - i2c-scl-falling-time-ns : should contain the SCL falling time in
> nanoseconds.
> - This value which is by default 300ns is used to compute the tLOW period.
> -
> - - i2c-sda-falling-time-ns : should contain the SDA falling time in
> nanoseconds.
> - This value which is by default 300ns is used to compute the tHIGH period.
> -
> -Examples :
> -
> - i2c@f0000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "snps,designware-i2c";
> - reg = <0xf0000 0x1000>;
> - interrupts = <11>;
> - clock-frequency = <400000>;
> - };
> -
> - i2c@1120000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "snps,designware-i2c";
> - reg = <0x1120000 0x1000>;
> - interrupt-parent = <&ictl>;
> - interrupts = <12 1>;
> - clock-frequency = <400000>;
> - i2c-sda-hold-time-ns = <300>;
> - i2c-sda-falling-time-ns = <300>;
> - i2c-scl-falling-time-ns = <300>;
> - };
> -
> - i2c@1120000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x2000 0x100>;
> - clock-frequency = <400000>;
> - clocks = <&i2cclk>;
> - interrupts = <0>;
> -
> - eeprom@64 {
> - compatible = "linux,slave-24c02";
> - reg = <0x40000064>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
> b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
> new file mode 100644
> index 000000000000..8d4e5fccbd1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
> @@ -0,0 +1,154 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare APB I2C Controller
> +
> +maintainers:
> + - Jarkko Nikula <jarkko.nik...@linux.intel.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> + - if:
> + properties:
> + compatible:
> + not:
> + contains:
> + const: mscc,ocelot-i2c
> + then:
> + properties:
> + reg:
> + maxItems: 1
> +
> +properties:
> + compatible:
> + oneOf:
> + - description: Generic Synopsys DesignWare I2C controller
> + const: snps,designware-i2c
> + - description: Microsemi Ocelot SoCs I2C controller
> + items:
> + - const: mscc,ocelot-i2c
> + - const: snps,designware-i2c
> +
> + reg:
> + minItems: 1
> + items:
> + - description: DW APB I2C controller memory mapped registers
> + - description: |
> + ICPU_CFG:TWI_DELAY registers to setup the SDA hold time.
> + This registers are specific to the Ocelot I2C-controller.
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + items:
> + - description: I2C controller reference clock source
> + - description: APB interface clock source
> +
> + clock-names:
> + minItems: 1
> + items:
> + - const: ref
> + - const: pclk
> +
> + resets:
> + maxItems: 1
> +
> + clock-frequency:
> + description: Desired I2C bus clock frequency in Hz
> + enum: [100000, 400000, 1000000, 3400000]
> + default: 400000
> +
> + i2c-sda-hold-time-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
Don't need a type ref as properties with a unit-suffix already have one.
> + description: |
> + The property should contain the SDA hold time in nanoseconds. This
> option
> + is only supported in hardware blocks version 1.11a or newer or on
> + Microsemi SoCs.
> +
> + i2c-scl-falling-time-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + The property should contain the SCL falling time in nanoseconds.
> + This value is used to compute the tLOW period.
> + default: 300
> +
> + i2c-sda-falling-time-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + The property should contain the SDA falling time in nanoseconds.
> + This value is used to compute the tHIGH period.
> + default: 300
> +
> + dmas:
> + items:
> + - description: TX DMA Channel
> + - description: RX DMA Channel
> +
> + dma-names:
> + items:
> + - const: tx
> + - const: rx
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - "#address-cells"
> + - "#size-cells"
> + - interrupts
> +
> +examples:
> + - |
> + i2c@f0000 {
> + compatible = "snps,designware-i2c";
> + reg = <0xf0000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <11>;
> + clock-frequency = <400000>;
> + };
> + - |
> + i2c@1120000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x1120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <12 1>;
> + clock-frequency = <400000>;
> + i2c-sda-hold-time-ns = <300>;
> + i2c-sda-falling-time-ns = <300>;
> + i2c-scl-falling-time-ns = <300>;
> + };
> + - |
> + i2c@2000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x2000 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> + clocks = <&i2cclk>;
> + interrupts = <0>;
> +
> + eeprom@64 {
> + compatible = "linux,slave-24c02";
> + reg = <0x40000064>;
This causes 'make dt_binding_check' to fail. The unit-address should be
'40000064'. However, there's a bug in dtc not liking the high bits set
either. There's a fix pending, but I'd just fix the example here to
avoid the issue.
> + };
> + };
> + - |
> + i2c@100400 {
> + compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
> + reg = <0x100400 0x100>, <0x198 0x8>;
> + pinctrl-0 = <&i2c_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <8>;
> + clocks = <&ahb_clk>;
> + };
> +...
> --
> 2.25.1
>
