On Wed, May 27, 2020 at 03:51:57PM +0200, Arnd Bergmann wrote:
> Building this driver with "clang -O3" produces a link error
> after the compiler partially unrolls the loop and 256ms
> becomes a compile-time constant that triggers the check
> in udelay():
> 
> ld.lld: error: undefined symbol: __bad_udelay
> >>> referenced by applesmc.c
> >>>               hwmon/applesmc.o:(read_smc) in archive drivers/built-in.a
> 
> I can see no reason against using a sleeping function here,
> as no part of the driver runs in atomic context, so instead use
> usleep_range() with a wide range and use jiffies for the
> end condition.
> 
Me not either.

> Signed-off-by: Arnd Bergmann <a...@arndb.de>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/applesmc.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> index ec93b8d673f5..316618409315 100644
> --- a/drivers/hwmon/applesmc.c
> +++ b/drivers/hwmon/applesmc.c
> @@ -156,14 +156,19 @@ static struct workqueue_struct *applesmc_led_wq;
>   */
>  static int wait_read(void)
>  {
> +     unsigned long end = jiffies + (APPLESMC_MAX_WAIT * HZ) / USEC_PER_SEC;
>       u8 status;
>       int us;
> +
>       for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
> -             udelay(us);
> +             usleep_range(us, us * 16);
>               status = inb(APPLESMC_CMD_PORT);
>               /* read: wait for smc to settle */
>               if (status & 0x01)
>                       return 0;
> +             /* timeout: give up */
> +             if (time_after(jiffies, end))
> +                     break;
>       }
>  
>       pr_warn("wait_read() fail: 0x%02x\n", status);
> @@ -178,10 +183,11 @@ static int send_byte(u8 cmd, u16 port)
>  {
>       u8 status;
>       int us;
> +     unsigned long end = jiffies + (APPLESMC_MAX_WAIT * HZ) / USEC_PER_SEC;
>  
>       outb(cmd, port);
>       for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
> -             udelay(us);
> +             usleep_range(us, us * 16);
>               status = inb(APPLESMC_CMD_PORT);
>               /* write: wait for smc to settle */
>               if (status & 0x02)
> @@ -190,7 +196,7 @@ static int send_byte(u8 cmd, u16 port)
>               if (status & 0x04)
>                       return 0;
>               /* timeout: give up */
> -             if (us << 1 == APPLESMC_MAX_WAIT)
> +             if (time_after(jiffies, end))
>                       break;
>               /* busy: long wait and resend */
>               udelay(APPLESMC_RETRY_WAIT);

Reply via email to