On Thu, 2020-05-28 at 14:16 +0800, chuanjia....@mediatek.com wrote:
> There are two independent PCIe controllers in MT2712/MT7622 platform,
> and each of them should contain an independent MSI domain.
>
> In current architecture, MSI domain will be inherited from the root
> bridge, and all of the devices will share the same MSI domain.
> Hence that, the PCIe devices will not work properly if the irq number
> which required is more than 32.
>
> Split the PCIe node for MT2712/MT7622 platform to fix MSI issue and
> comply with the hardware design.
>
> change note:
> v2: change the allocation of mt2712 PCIe MMIO space due to the allcation
> size is not right in v1.
>
> chuanjia.liu (4):
> dt-bindings: PCI: Mediatek: Update PCIe binding
> PCI: mediatek: Use regmap to get shared pcie-cfg base
> arm64: dts: mediatek: Split PCIe node for MT2712/MT7622
> ARM: dts: mediatek: Update mt7629 PCIe node
>
> .../bindings/pci/mediatek-pcie-cfg.yaml | 38 +++++
> .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++-------
> arch/arm/boot/dts/mt7629-rfb.dts | 3 +-
> arch/arm/boot/dts/mt7629.dtsi | 23 +--
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 75 +++++----
> .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 16 +-
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 6 +-
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 68 ++++++---
> drivers/pci/controller/pcie-mediatek.c | 25 ++-
> 9 files changed, 258 insertions(+), 140 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
>
> --
> 2.18.0
>
>
For the series:
Acked-by: Ryder Lee <ryder....@mediatek.com>
