On Mon, Jun 8, 2020 at 7:05 PM Eddie James <[email protected]> wrote:
>
> Ports should be defined in the devicetree if they are to be enabled on
> the system.
...
> for (port_no = 0; port_no < ports; port_no++) {
> np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
> - if (np && !of_device_is_available(np))
> + /* Do not add port if it is not described in the device tree
> */
> + if (!np)
> + continue;
I believe this is redundant, since below will do the same second time.
> + /* Do not add port if it is described as disabled */
> + if (!of_device_is_available(np))
> continue;
--
With Best Regards,
Andy Shevchenko
