From: Bolarinwa Olayemi Saheed <[email protected]>

On failure, pcie_capabiility_read_*() will set the status value,
its last parameter to 0 and not ~0.
This bug fix checks for the proper value.

Signed-off-by: Bolarinwa Olayemi Saheed <[email protected]>
---
 drivers/pci/hotplug/pciehp_hpc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 53433b37e181..c1a67054948a 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -89,7 +89,7 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
 
        do {
                pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-               if (slot_status == (u16) ~0) {
+               if (slot_status == (u16)0) {
                        ctrl_info(ctrl, "%s: no response from device\n",
                                  __func__);
                        return 0;
@@ -165,7 +165,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 
cmd,
        pcie_wait_cmd(ctrl);
 
        pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
-       if (slot_ctrl == (u16) ~0) {
+       if (slot_ctrl == (u16)0) {
                ctrl_info(ctrl, "%s: no response from device\n", __func__);
                goto out;
        }
@@ -236,7 +236,7 @@ int pciehp_check_link_active(struct controller *ctrl)
        int ret;
 
        ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-       if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0)
+       if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)0)
                return -ENODEV;
 
        ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
@@ -440,7 +440,7 @@ int pciehp_card_present(struct controller *ctrl)
        int ret;
 
        ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-       if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0)
+       if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)0)
                return -ENODEV;
 
        return !!(slot_status & PCI_EXP_SLTSTA_PDS);
@@ -592,7 +592,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 
 read_status:
        pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
-       if (status == (u16) ~0) {
+       if (status == (u16)0) {
                ctrl_info(ctrl, "%s: no response from device\n", __func__);
                if (parent)
                        pm_runtime_put(parent);
-- 
2.18.2

Reply via email to