Hi Vinod, On Mon, Jun 29, 2020 at 06:49:17PM +0530, Vinod Koul wrote: > On 29-06-20, 15:00, Laurent Pinchart wrote: > > Hello, > > > > The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial > > transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by > > the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are > > part of the Serial I/O Unit (SIOU). > > > > The code is based on a previous version sent by Anurag Kumar Vulisha and > > available at [1]. The DT bindings have been converted to YAML, and both > > the bindings and the driver have been considerably reworked (and > > simplified). The most notable changes is the removal of manual handling > > of the reset lines of the PHY users (which belongs to the PHY users > > themselves), and moving to the standard PHY .power_on() and .configure() > > operations to replace functions that were previously exported by the > > driver. Please see individual patches for a more detailed changelog. > > > > Compared to v8, the series has been rebased on phy/next, and a minor > > issue in MAINTAINERS has been fixed. > > Thanks for quick rebase, Applied 1 & 2 now
Thank you. Michal, could you apply 3/3 to your tree ? > > [1] https://patchwork.kernel.org/cover/10735681/ > > > > Anurag Kumar Vulisha (2): > > dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY > > phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver > > > > Laurent Pinchart (1): > > arm64: dts: zynqmp: Add GTR transceivers > > > > .../bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 ++ > > MAINTAINERS | 9 + > > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 + > > drivers/phy/Kconfig | 1 + > > drivers/phy/Makefile | 3 +- > > drivers/phy/xilinx/Kconfig | 13 + > > drivers/phy/xilinx/Makefile | 3 + > > drivers/phy/xilinx/phy-zynqmp.c | 995 ++++++++++++++++++ > > include/dt-bindings/phy/phy.h | 1 + > > 9 files changed, 1139 insertions(+), 1 deletion(-) > > create mode 100644 > > Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml > > create mode 100644 drivers/phy/xilinx/Kconfig > > create mode 100644 drivers/phy/xilinx/Makefile > > create mode 100644 drivers/phy/xilinx/phy-zynqmp.c -- Regards, Laurent Pinchart
