On Sun, 21 Jun 2020 00:39:04 +0200
Jonathan Neuschäfer <j.neuschae...@gmx.net> wrote:

> Hi,
> This patchset adds basic support for the embedded controller found on
> older ebook reader boards designed by/with the ODM Netronix Inc.[1] and
> sold by Kobo or Tolino, for example the Kobo Aura and the Tolino Shine.
> These drivers are based on the vendor kernel sources, but in order to
> all information in a single place, I documented the register interface
> of the EC on GitHub[4].
> A few things still needs to be ironed out, hence the RFC tag:
>  - The reboot/reset handler in patch 3/10 calls into I2C code, which may
>    sleep, but reboot handlers are apparently not allowed to sleep.
>  - I'm not sure I got the YAML DT bindings right. I have also included
>    the plain text DT bindings for reference.
got a chance to test it on a Tolino Shine 2 HD.
It uses the RTC from the RC5T619 but backlight seems to go via MSP430

I got this.

[    1.453603] ntxec 0-0043: Netronix embedded controller version f110 detected.
[   10.723638] ntxec-rtc 21a0000.i2c:embedded-controller@43:rtc: registered as 
[   10.775276] ntxec-pwm: probe of 21a0000.i2c:embedded-controller@43:pwm 
failed with error -5
[   10.850597] ntxec-rtc 21a0000.i2c:embedded-controller@43:rtc: hctosys: 
unable to read the hardware clock

version number matchess with what the vendor kernel reports. Maybe we
should document which version is running on which devices?

&i2c1 {
        pinctrl-names = "default","sleep";
        pinctrl-0 = <&pinctrl_i2c1>;
        pinctrl-1 = <&pinctrl_i2c1_sleep>;
        status = "okay";

        embedded-controller@43 {
//              pinctrl-names = "default";
//              pinctrl-0 = <&pinctrl_ec>;
                compatible = "netronix,ntxec";
                reg = <0x43>;
                interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
                #interrupt-cells = <1>;

                ec_pwm: pwm {
                        compatible = "netronix,ntxec-pwm";
                        #pwm-cells = <2>;

                rtc {
                        compatible = "netronix,ntxec-rtc";


Reply via email to