On 7/21/20 7:43 AM, Al Cooper wrote: > On Android systems, After temporarily putting device to S2 by > short pressing the power button on the remote, the display turns > off. Then press the power button to turn the display back up. Adb > devices would show the devices is offline. It needs a physical > disconnect of the usb cable or power cycle to bring the device > back online. The device is operational otherwise. > > The problem is that during S2 resume, the ADB gadget driver could > not link back with the BDC driver because the endpoint flags were > cleared. The fix is to clear the endpoint flags for the disconnect > case only and not for S2 exit. > > Signed-off-by: Al Cooper <alcoop...@gmail.com>
Acked-by: Florian Fainelli <f.faine...@gmail.com> -- Florian
