On Thu, Jul 23, 2020 at 11:57:31PM +0800, Kai-Heng Feng wrote:
> After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
> command"), SK hynix PC400 becomes very slow with the following error
> message:
> [ 224.567695] blk_update_request: operation not supported error, dev
> nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0
> prio class 0]
>
> SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
> of a range, so the NLB passed isn't a valid value to the firmware.
>
> According to SK hynix there are three commands are affected:
> - Write Zeroes
> - Compare
> - Write Uncorrectable
>
> Write Uncorrectable isn't implemented yet, so add a new quirk to
> workaround the former two commands.
compare isn't implemented either in the kernel, and we certainly
aren't going to do these quirks for passthrough. So I think we really
want a "write zeroes is buggy" quirk and just disable issuing that
command from the driver.
>
> BugLink: https://bugs.launchpad.net/bugs/1872383
> Cc: kyounghwan sohn <[email protected]>
> Signed-off-by: Kai-Heng Feng <[email protected]>
> ---
> v2:
> - SK hynix found the root cause so change the approach accordingly.
> - lspci is wrong, the device is PC400 instead of SC300.
I don't remember seing a v1..
