On Mon, 27 Jul 2020 16:58:34 +0300, Darius Berghe wrote:
> Add dt binding documentation for ltc2471 driver. This covers all supported
> devices.
>
> Signed-off-by: Darius Berghe <[email protected]>
> ---
> .../bindings/iio/adc/adi,ltc2471.yaml | 49 +++++++++++++++++++
> 1 file changed, 49 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.yaml: $id: relative
path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/iio/adc/adi,ltc2471.yaml#
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dts:22.13-26:
Warning (reg_format): /example-0/i2c0/adc@14:reg: property has invalid length
(4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning
(pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning
(simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dts:20.18-23.13:
Warning (avoid_default_addr_size): /example-0/i2c0/adc@14: Relying on default
#address-cells value
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dts:20.18-23.13:
Warning (avoid_default_addr_size): /example-0/i2c0/adc@14: Relying on default
#size-cells value
Documentation/devicetree/bindings/iio/adc/adi,ltc2471.example.dt.yaml: Warning
(unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
See https://patchwork.ozlabs.org/patch/1336970
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
--upgrade
Please check and re-submit.
