Re: [PATCH] arm64: dts: sun50i-pinephone: add led flash

[Maxime Ripard]

Hi!

On Sat, Jul 25, 2020 at 01:08:12PM +0200, Luca Weiss wrote:
> All revisions of the PinePhone have an SGM3140 LED flash. The gpios were
> swapped on v1.0 of the board but this was fixed in later revisions.
> 
> Signed-off-by: Luca Weiss <l...@z3ntu.xyz>
> ---
>  .../boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts   |  5 +++++
>  .../boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts   |  5 +++++
>  .../boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts   |  5 +++++
>  .../boot/dts/allwinner/sun50i-a64-pinephone.dtsi      | 11 +++++++++++
>  4 files changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts 
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
> index 0c42272106afa..b579b03d4e026 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
> @@ -9,3 +9,8 @@ / {
>       model = "Pine64 PinePhone Developer Batch (1.0)";
>       compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
>  };
> +
> +&sgm3140 {
> +     flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
> +     enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts 
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
> index 3e99a87e9ce52..8552587aac248 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
> @@ -28,3 +28,8 @@ &backlight {
>       num-interpolated-steps = <50>;
>       default-brightness-level = <400>;
>  };
> +
> +&sgm3140 {
> +     flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
> +     enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts 
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> index a9f5b670c9b82..ec77715ba4a2a 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> @@ -38,3 +38,8 @@ &lis3mdl {
>       interrupt-parent = <&pio>;
>       interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
>  };
> +
> +&sgm3140 {
> +     flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
> +     enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi 
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> index 25150aba749dc..e0bc1bcc1c1f3 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> @@ -60,6 +60,17 @@ vibrator {
>               enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
>               vcc-supply = <&reg_dcdc1>;
>       };
> +
> +     sgm3140: led-controller {

The nodes should be ordered by node-name here

> +             compatible = "sgmicro,sgm3140";
> +             vin-supply = <&reg_dcdc1>;
> +
> +             sgm3140_flash: led {

What do you need the label for?

Thanks!
Maxime

signature.asc
Description: PGP signature