The driver for the as73211 light sensor provides the following not yet
documented sysfs entries:
- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale
- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time
Signed-off-by: Christian Eggers <cegg...@arri.de>
---
On Thursday, 6 August 2020, 19:44:51 CEST, Jonathan Cameron wrote:
Hi Jonathan,
> Hi Christian,
>
> I'll take this, but please send a follow up patch to add documentation
> for in_intensity_x_raw and all the other new ABI this adds in
> Documentation/ABI/testing/sysfs-bus-iio
> I should have mentioned that earlier, but kind of assumed we already
> had these documented for some reason!
> [...]
> Insert them into the relevant groups that already exist. In some cases
> it will just be adding an entry with no specific explanation.
> For the _raw attribute add a bit more info about what x, y and z are
> (basically just say they are from cie1931 (I think?)
I added all sysfs entries which were not present in 5.8-rc6.
Best regards
Christian
Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-iio
b/Documentation/ABI/testing/sysfs-bus-iio
index d3e53a6d8331..14ae4bf053c5 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -40,6 +40,7 @@ Description:
buffered samples and events for device X.
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
What: /sys/bus/iio/devices/triggerX/sampling_frequency
KernelVersion: 2.6.35
@@ -55,6 +56,7 @@ Description:
then it is to be found in the base device directory.
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:
/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
What:
/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
What: /sys/.../iio:deviceX/buffer/sampling_frequency_available
What: /sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -374,6 +376,9 @@ What:
/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
KernelVersion: 2.6.35
Contact: linux-...@vger.kernel.org
Description:
@@ -484,6 +489,7 @@ Description:
are listed in this attribute.
What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +500,13 @@ Description:
Hardware applied gain factor. If shared across all channels,
<type>_hardwaregain is used.
+What:
/sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion: 5.10
+Contact: linux-...@vger.kernel.org
+Description:
+ Lists all available hardware applied gain factors. Shared
across all
+ channels.
+
What: /sys/.../in_accel_filter_low_pass_3db_frequency
What: /sys/.../in_magn_filter_low_pass_3db_frequency
What: /sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -1333,6 +1346,7 @@ Description:
standardised CIE Erythemal Action Spectrum. UV index values
range
from 0 (low) to >=11 (extreme).
+What: /sys/.../iio:deviceX/in_intensity_integration_time
What: /sys/.../iio:deviceX/in_intensity_red_integration_time
What: /sys/.../iio:deviceX/in_intensity_green_integration_time
What: /sys/.../iio:deviceX/in_intensity_blue_integration_time
@@ -1342,7 +1356,8 @@ KernelVersion: 3.12
Contact: linux-...@vger.kernel.org
Description:
This attribute is used to get/set the integration time in
- seconds.
+ seconds. If shared across all channels, <type>_integration_time
+ is used.
What:
/sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
KernelVersion: 4.0
@@ -1739,3 +1754,12 @@ KernelVersion: 5.5
Contact: linux-...@vger.kernel.org
Description:
One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion: 5.10
+Contact: linux-...@vger.kernel.org
+Description:
+ Unscaled light intensity according to CIE 1931/DIN 5033 color
space.
+ Units after application of scale are nano nanowatts per square
meter.
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer:
HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer:
HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger;
Markus Zeiler
