From: ChiYuan Huang <cy_hu...@richtek.com> Adds support for the RT4801 DSV. It has two regulators (DSVP/DSVN) with an I2C interface. DSVP/DSVN can provide the display panel module for the positive/negative voltage range from (+/-)4V to (+/-)6V. --- .../regulator/richtek,rt4801-regulator.yaml | 80 ++++++++ drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/rt4801-regulator.c | 223 +++++++++++++++++++++ 4 files changed, 311 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml create mode 100644 drivers/regulator/rt4801-regulator.c
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml new file mode 100644 index 00000000..28d30e2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4801 Display Bias regulators + +maintainers: + - ChiYuan Huang <cy_hu...@richtek.com> + +description: | + Regulator nodes should be named to DSVP and DSVN. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf + +#The valid names for RT4801 regulator nodes are: +#DSVP, DSVN + +properties: + compatible: + enum: + - richtek,rt4801 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIOs to use to enable DSVP/DSVN regulator. + The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. + Number of GPIO in the array list could be 1 or 2. + If only one gpio is specified, only one gpio used to control ENP/ENM. + Else both are spefied, DSVP/DSVN could be controlled individually. + Othersie, this property not specified. treat both as always-on regulator. + minItems: 1 + maxItems: 2 + +patternProperties: + "^DSV(P|N)$": + type: object + $ref: regulator.yaml# + description: + Properties for single display bias regulator. + +required: + - compatible + - reg + +additionalProperties: + - enable-gpios + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4801@73 { + compatible = "richtek,rt4801"; + reg = <0x73>; + enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>; + + dsvp: DSVP { + regulator-name = "rt4801,dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvn: DSVN { + regulator-name = "rt4801,dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index de17ef7..2786f11 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -894,6 +894,13 @@ config REGULATOR_RN5T618 config REGULATOR_ROHM tristate +config REGULATOR_RT4801 + tristate "Richtek RT4801 Regulators" + depends on I2C + help + This adds support for voltage regulators in Richtek RT4801 Display Bias IC. + The device supports two regulators (DSVP/DSVN). + config REGULATOR_RT5033 tristate "Richtek RT5033 Regulators" depends on MFD_RT5033 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index d8d3ecf..d091e52d 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -111,6 +111,7 @@ obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o obj-$(CONFIG_REGULATOR_ROHM) += rohm-regulator.o +obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o diff --git a/drivers/regulator/rt4801-regulator.c b/drivers/regulator/rt4801-regulator.c new file mode 100644 index 00000000..0ddc670 --- /dev/null +++ b/drivers/regulator/rt4801-regulator.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +#define RT4801_REG_VOP 0x00 +#define RT4801_REG_VON 0x01 +#define RT4801_REG_APPS 0x03 + +#define VOUT_MASK 0x1F + +#define MIN_UV 4000000 +#define STEP_UV 100000 +#define MAX_UV 6000000 +#define N_VOLTAGES ((MAX_UV - MIN_UV) / STEP_UV + 1) + +#define DSV_OUT_POS 0 +#define DSV_OUT_NEG 1 +#define DSV_OUT_MAX 2 + +#define DSVP_ENABLE BIT(0) +#define DSVN_ENABLE BIT(1) +#define DSVALL_ENABLE (DSVP_ENABLE | DSVN_ENABLE) + +struct rt4801_priv { + struct device *dev; + struct gpio_descs *enable_gpios; + unsigned int enable_flag; + unsigned int volt_sel[DSV_OUT_MAX]; +}; + +static int rt4801_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) +{ + struct rt4801_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev), ret; + + if (priv->enable_flag & BIT(id)) { + ret = regulator_set_voltage_sel_regmap(rdev, selector); + if (ret) + return ret; + } + + priv->volt_sel[id] = selector; + return 0; +} + +static int rt4801_get_voltage_sel(struct regulator_dev *rdev) +{ + struct rt4801_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + if (priv->enable_flag & BIT(id)) + return regulator_get_voltage_sel_regmap(rdev); + + return priv->volt_sel[id]; +} + +static int rt4801_enable(struct regulator_dev *rdev) +{ + struct rt4801_priv *priv = rdev_get_drvdata(rdev); + struct gpio_descs *gpios = priv->enable_gpios; + int id = rdev_get_id(rdev), ret; + + if (gpios->ndescs <= id) { + dev_warn(&rdev->dev, "no dedicated gpio can control\n"); + goto bypass_gpio; + } + + gpiod_set_value(gpios->desc[id], 1); + +bypass_gpio: + ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, priv->volt_sel[id]); + if (ret) + return ret; + + priv->enable_flag |= BIT(id); + return 0; +} + +static int rt4801_disable(struct regulator_dev *rdev) +{ + struct rt4801_priv *priv = rdev_get_drvdata(rdev); + struct gpio_descs *gpios = priv->enable_gpios; + int id = rdev_get_id(rdev); + + if (gpios->ndescs <= id) { + dev_warn(&rdev->dev, "no dedicated gpio can control\n"); + goto bypass_gpio; + } + + gpiod_set_value(gpios->desc[id], 0); + +bypass_gpio: + priv->enable_flag &= ~BIT(id); + return 0; +} + +static int rt4801_is_enabled(struct regulator_dev *rdev) +{ + struct rt4801_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + return !!(priv->enable_flag & BIT(id)); +} + +static const struct regulator_ops rt4801_regulator_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = rt4801_set_voltage_sel, + .get_voltage_sel = rt4801_get_voltage_sel, + .enable = rt4801_enable, + .disable = rt4801_disable, + .is_enabled = rt4801_is_enabled, +}; + +static const struct regulator_desc rt4801_regulator_descs[] = { + { + .name = "DSVP", + .ops = &rt4801_regulator_ops, + .of_match = of_match_ptr("DSVP"), + .type = REGULATOR_VOLTAGE, + .id = DSV_OUT_POS, + .min_uV = MIN_UV, + .uV_step = STEP_UV, + .n_voltages = N_VOLTAGES, + .owner = THIS_MODULE, + .vsel_reg = RT4801_REG_VOP, + .vsel_mask = VOUT_MASK, + }, + { + .name = "DSVN", + .ops = &rt4801_regulator_ops, + .of_match = of_match_ptr("DSVN"), + .type = REGULATOR_VOLTAGE, + .id = DSV_OUT_NEG, + .min_uV = MIN_UV, + .uV_step = STEP_UV, + .n_voltages = N_VOLTAGES, + .owner = THIS_MODULE, + .vsel_reg = RT4801_REG_VON, + .vsel_mask = VOUT_MASK, + }, +}; + +static const struct regmap_config rt4801_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RT4801_REG_APPS, +}; + +static int rt4801_probe(struct i2c_client *i2c) +{ + struct rt4801_priv *priv; + struct regmap *regmap; + int i; + + priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &i2c->dev; + /* bootloader will on, driver only reconfigure enable to all output high */ + priv->enable_flag = DSVALL_ENABLE; + + regmap = devm_regmap_init_i2c(i2c, &rt4801_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&i2c->dev, "Failed to init regmap\n"); + return PTR_ERR(regmap); + } + + priv->enable_gpios = devm_gpiod_get_array_optional(&i2c->dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(priv->enable_gpios)) { + dev_err(&i2c->dev, "Failed to get gpios\n"); + return PTR_ERR(priv->enable_gpios); + } + + for (i = 0; i < DSV_OUT_MAX; i++) { + const struct regulator_desc *desc = rt4801_regulator_descs + i; + struct regulator_config config = { .dev = &i2c->dev, .driver_data = priv, + .regmap = regmap, }; + struct regulator_dev *rdev; + unsigned int val; + int ret; + + /* initialize volt_sel variable */ + ret = regmap_read(regmap, desc->vsel_reg, &val); + if (ret) + return ret; + + priv->volt_sel[i] = val & desc->vsel_mask; + + rdev = devm_regulator_register(&i2c->dev, desc, &config); + if (IS_ERR(rdev)) { + dev_err(&i2c->dev, "Failed to register [%d] regulator\n", i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct of_device_id rt4801_of_id[] = { + { .compatible = "richtek,rt4801", }, + { }, +}; +MODULE_DEVICE_TABLE(of, rt4801_of_id); + +static struct i2c_driver rt4801_driver = { + .driver = { + .name = "rt4801", + .of_match_table = of_match_ptr(rt4801_of_id), + }, + .probe_new = rt4801_probe, +}; +module_i2c_driver(rt4801_driver); + +MODULE_AUTHOR("ChiYuan Hwang <cy_hu...@richtek.com>"); +MODULE_DESCRIPTION("Richtek RT4801 Display Bias Driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4
