On 8/25/20 12:48 AM, Mathieu Poirier wrote:
> On Fri, Jul 31, 2020 at 01:47:29PM +0200, Arnaud Pouliquen wrote:
>> As generic NS driver is available, rely on it for NS management instead of
>> managing it in RPMsg virtio bus.
>>
>> Signed-off-by: Arnaud Pouliquen <[email protected]>
>> ---
>> drivers/rpmsg/Kconfig | 1 +
>> drivers/rpmsg/virtio_rpmsg_bus.c | 86 ++++++++------------------------
>> 2 files changed, 21 insertions(+), 66 deletions(-)
>>
>> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
>> index 140faa975ea1..0143c9864c45 100644
>> --- a/drivers/rpmsg/Kconfig
>> +++ b/drivers/rpmsg/Kconfig
>> @@ -71,5 +71,6 @@ config RPMSG_VIRTIO
>> depends on HAS_DMA
>> select RPMSG
>> select VIRTIO
>> + select RPMSG_NS
>>
>> endmenu
>> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c
>> b/drivers/rpmsg/virtio_rpmsg_bus.c
>> index b2927661868c..f771fdae150e 100644
>> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
>> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
>> @@ -48,7 +48,6 @@
>> * @endpoints_lock: lock of the endpoints set
>> * @sendq: wait queue of sending contexts waiting for a tx buffers
>> * @sleepers: number of senders that are waiting for a tx buffer
>> - * @ns_ept: the bus's name service endpoint
>> *
>> * This structure stores the rpmsg state of a given virtio remote processor
>> * device (there might be several virtio proc devices for each physical
>> @@ -67,7 +66,6 @@ struct virtproc_info {
>> struct mutex endpoints_lock;
>> wait_queue_head_t sendq;
>> atomic_t sleepers;
>> - struct rpmsg_endpoint *ns_ept;
>> };
>>
>> /* The feature bitmap for virtio rpmsg */
>> @@ -841,68 +839,14 @@ static void rpmsg_xmit_done(struct virtqueue *svq)
>> wake_up_interruptible(&vrp->sendq);
>> }
>>
>> -/* invoked when a name service announcement arrives */
>> -static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
>> - void *priv, u32 src)
>> -{
>> - struct rpmsg_ns_msg *msg = data;
>> - struct rpmsg_device *newch;
>> - struct rpmsg_channel_info chinfo;
>> - struct virtproc_info *vrp = priv;
>> - struct device *dev = &vrp->vdev->dev;
>> - int ret;
>> -
>> -#if defined(CONFIG_DYNAMIC_DEBUG)
>> - dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
>> - data, len, true);
>> -#endif
>> -
>> - if (len != sizeof(*msg)) {
>> - dev_err(dev, "malformed ns msg (%d)\n", len);
>> - return -EINVAL;
>> - }
>> -
>> - /*
>> - * the name service ept does _not_ belong to a real rpmsg channel,
>> - * and is handled by the rpmsg bus itself.
>> - * for sanity reasons, make sure a valid rpdev has _not_ sneaked
>> - * in somehow.
>> - */
>> - if (rpdev) {
>> - dev_err(dev, "anomaly: ns ept has an rpdev handle\n");
>> - return -EINVAL;
>> - }
>> -
>> - /* don't trust the remote processor for null terminating the name */
>> - msg->name[RPMSG_NAME_SIZE - 1] = '\0';
>> -
>> - strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
>> - chinfo.src = RPMSG_ADDR_ANY;
>> - chinfo.dst = virtio32_to_cpu(vrp->vdev, msg->addr);
>> -
>> - dev_info(dev, "%sing channel %s addr 0x%x\n",
>> - virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY ?
>> - "destroy" : "creat", msg->name, chinfo.dst);
>> -
>> - if (virtio32_to_cpu(vrp->vdev, msg->flags) & RPMSG_NS_DESTROY) {
>> - ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
>> - if (ret)
>> - dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
>> - } else {
>> - newch = __rpmsg_create_channel(vrp, &chinfo);
>> - if (!newch)
>> - dev_err(dev, "rpmsg_create_channel failed\n");
>> - }
>> -
>> - return 0;
>> -}
>> -
>> static int rpmsg_probe(struct virtio_device *vdev)
>> {
>> vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done };
>> static const char * const names[] = { "input", "output" };
>> struct virtqueue *vqs[2];
>> struct virtproc_info *vrp;
>> + struct virtio_rpmsg_channel *vch;
>> + struct rpmsg_device *rpdev_ns;
>> void *bufs_va;
>> int err = 0, i;
>> size_t total_buf_space;
>> @@ -978,14 +922,27 @@ static int rpmsg_probe(struct virtio_device *vdev)
>>
>> /* if supported by the remote processor, enable the name service */
>> if (virtio_has_feature(vdev, VIRTIO_RPMSG_F_NS)) {
>> - /* a dedicated endpoint handles the name service msgs */
>> - vrp->ns_ept = __rpmsg_create_ept(vrp, NULL, rpmsg_ns_cb,
>> - vrp, RPMSG_NS_ADDR);
>> - if (!vrp->ns_ept) {
>> - dev_err(&vdev->dev, "failed to create the ns ept\n");
>> + vch = kzalloc(sizeof(*vch), GFP_KERNEL);
>> + if (!vch) {
>> err = -ENOMEM;
>> goto free_coherent;
>> }
>> +
>> + /* Link the channel to our vrp */
>> + vch->vrp = vrp;
>> +
>> + /* Assign public information to the rpmsg_device */
>> + rpdev_ns = &vch->rpdev;
>> + rpdev_ns->ops = &virtio_rpmsg_ops;
>> +
>> + rpdev_ns->dev.parent = &vrp->vdev->dev;
>> + rpdev_ns->dev.release = virtio_rpmsg_release_device;
>> +
>> + err = rpmsg_ns_register_device(rpdev_ns);
>> + if (err) {
>> + kfree(vch);
>> + goto free_coherent;
>> + }
>
> This patch doesn't apply to Bjorn's rproc-next anymore - would you mind
> rebasing?
I will base my V2 on Bjorn's for-next (ca69dba7f13a293f83b08f003cd935c6abfee249)
Thanks,
Arnaud
>
>> }
>>
>> /*
>> @@ -1038,9 +995,6 @@ static void rpmsg_remove(struct virtio_device *vdev)
>> if (ret)
>> dev_warn(&vdev->dev, "can't remove rpmsg device: %d\n", ret);
>>
>> - if (vrp->ns_ept)
>> - __rpmsg_destroy_ept(vrp, vrp->ns_ept);
>> -
>> idr_destroy(&vrp->endpoints);
>>
>> vdev->config->del_vqs(vrp->vdev);
>> --
>> 2.17.1
>>
