Hi Holger On 8/7/20 5:03 PM, Holger Assmann wrote:
The KSZ9031 PHY skew timings for rxc/txc, originally set to achieve the desired phase shift between clock- and data-signal, now trigger a kernel warning when used in rgmii-id mode:*-skew-ps values should be used only with phy-mode = "rgmii" This is because commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") now configures own timings when phy-mode = "rgmii-id". Device trees wanting to set their own delays should use phy-mode "rgmii" instead as the warning prescribes. The "standard" timings now used with "rgmii-id" work fine on this board, so drop the explicit timings in the device tree and thereby silence the warning. Fixes: 666b5ca85cd3 ("ARM: dts: stm32: add STM32MP1-based Linux Automation MC-1 board") Signed-off-by: Holger Assmann <h.assm...@pengutronix.de> --- arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 5700e6b700d3..b85025d00943 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -121,8 +121,6 @@ reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ interrupt-parent = <&gpioa>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */ - rxc-skew-ps = <1860>; - txc-skew-ps = <1860>; reset-assert-us = <10000>; reset-deassert-us = <300>; micrel,force-master;
Applied on stm32-next. Thanks. Alex
