Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm/boot/dts/exynos5250-spring.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index b6fcf847fc2f..166a0d287633 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> @@ -141,7 +142,7 @@ <1200000>, <1200000>, <1200000>, <1200000>; - clocks { + s5m8767_osc: clocks { compatible = "samsung,s5m8767-clk"; #clock-cells = <1>; clock-output-names = "en32khz_ap", @@ -522,6 +523,12 @@ }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + &sd1_bus4 { samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; -- 2.17.1
