From: Luo Jiaxing <[email protected]> The macro for OOB phy linkrate is named as CFG_PROG_PHY_LINK_RATE_*, but it's not correct. To avoid some misunderstand, we modify it to a correct naming.
Signed-off-by: Luo Jiaxing <[email protected]> Signed-off-by: John Garry <[email protected]> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 60adf5c32143..05b60cdf6b24 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -191,8 +191,8 @@ #define PHY_CFG_PHY_RST_OFF 3 #define PHY_CFG_PHY_RST_MSK (0x1 << PHY_CFG_PHY_RST_OFF) #define PROG_PHY_LINK_RATE (PORT_BASE + 0x8) -#define CFG_PROG_PHY_LINK_RATE_OFF 8 -#define CFG_PROG_PHY_LINK_RATE_MSK (0xf << CFG_PROG_PHY_LINK_RATE_OFF) +#define CFG_PROG_OOB_PHY_LINK_RATE_OFF 8 +#define CFG_PROG_OOB_PHY_LINK_RATE_MSK (0xf << CFG_PROG_OOB_PHY_LINK_RATE_OFF) #define PHY_CTRL (PORT_BASE + 0x14) #define PHY_CTRL_RESET_OFF 0 #define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF) @@ -2998,8 +2998,8 @@ static void hisi_sas_bist_test_restore_v3_hw(struct hisi_hba *hisi_hba) /* restore the linkrate */ reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, PROG_PHY_LINK_RATE); /* init OOB link rate as 1.5 Gbits */ - reg_val &= ~CFG_PROG_PHY_LINK_RATE_MSK; - reg_val |= (0x8 << CFG_PROG_PHY_LINK_RATE_OFF); + reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK; + reg_val |= (0x8 << CFG_PROG_OOB_PHY_LINK_RATE_OFF); hisi_sas_phy_write32(hisi_hba, phy_id, PROG_PHY_LINK_RATE, reg_val); /* enable PHY */ @@ -3027,8 +3027,8 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable) /* set linkrate of bit test*/ reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, PROG_PHY_LINK_RATE); - reg_val &= ~CFG_PROG_PHY_LINK_RATE_MSK; - reg_val |= (linkrate << CFG_PROG_PHY_LINK_RATE_OFF); + reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK; + reg_val |= (linkrate << CFG_PROG_OOB_PHY_LINK_RATE_OFF); hisi_sas_phy_write32(hisi_hba, phy_id, PROG_PHY_LINK_RATE, reg_val); @@ -3050,8 +3050,7 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable) hisi_sas_phy_write32(hisi_hba, phy_id, SAS_PHY_BIST_CODE, SAS_PHY_BIST_CODE_INIT); - hisi_sas_phy_write32(hisi_hba, phy_id, - SAS_PHY_BIST_CODE1, + hisi_sas_phy_write32(hisi_hba, phy_id, SAS_PHY_BIST_CODE1, SAS_PHY_BIST_CODE1_INIT); mdelay(100); -- 2.26.2
