On Sun, Sep 20, 2020 at 06:35:38PM +0200, Krzysztof Kozlowski wrote: > On Wed, Sep 16, 2020 at 01:37:02PM +0800, Xu Yilun wrote: > > This driver is for the EMIF private feature implemented under FPGA > > Device Feature List (DFL) framework. It is used to expose memory > > interface status information as well as memory clearing control. > > > > The purpose of memory clearing block is to zero out all private memory > > when FPGA is to be reprogrammed. This gives users a reliable method to > > prevent potential data leakage. > > > > Signed-off-by: Xu Yilun <[email protected]> > > Signed-off-by: Russ Weight <[email protected]> > > --- > > v2: Adjust the position of this driver in Kconfig. > > Improves the name of the Kconfig option. > > Change the include dfl-bus.h to dfl.h, cause the previous patchset > > renames the file. > > Some minor fixes and comment improvement. > > --- > > .../ABI/testing/sysfs-bus-dfl-devices-emif | 25 +++ > > drivers/memory/Kconfig | 9 + > > drivers/memory/Makefile | 2 + > > drivers/memory/dfl-emif.c | 207 > > +++++++++++++++++++++ > > 4 files changed, 243 insertions(+) > > create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl-devices-emif > > create mode 100644 drivers/memory/dfl-emif.c > > > > diff --git a/Documentation/ABI/testing/sysfs-bus-dfl-devices-emif > > b/Documentation/ABI/testing/sysfs-bus-dfl-devices-emif > > new file mode 100644 > > index 0000000..56f97dc > > --- /dev/null > > +++ b/Documentation/ABI/testing/sysfs-bus-dfl-devices-emif > > @@ -0,0 +1,25 @@ > > +What: /sys/bus/dfl/devices/dfl_dev.X/infX_cal_fail > > +Date: Sep 2020 > > +KernelVersion: 5.10 > > +Contact: Xu Yilun <[email protected]> > > +Description: Read-only. It indicates if the calibration failed on > > this > > + memory interface. "1" for calibration failure, "0" for OK. > > + Format: %u > > + > > +What: /sys/bus/dfl/devices/dfl_dev.X/infX_init_done > > +Date: Sep 2020 > > +KernelVersion: 5.10 > > +Contact: Xu Yilun <[email protected]> > > +Description: Read-only. It indicates if the initialization completed > > on > > + this memory interface. "1" for initialization complete, "0" > > + for not yet. > > + Format: %u > > + > > +What: /sys/bus/dfl/devices/dfl_dev.X/infX_clear > > +Date: Sep 2020 > > +KernelVersion: 5.10 > > +Contact: Xu Yilun <[email protected]> > > +Description: Write-only. Writing "1" to this file will zero out all > > memory > > + data in this memory interface. Writing of other values is > > + invalid. > > + Format: %u > > diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig > > index 8072204..8dc819f 100644 > > --- a/drivers/memory/Kconfig > > +++ b/drivers/memory/Kconfig > > @@ -136,6 +136,15 @@ config TI_EMIF_SRAM > > sequence so this driver provides several relocatable PM functions > > for the SoC PM code to use. > > > > +config FPGA_DFL_EMIF > > + tristate "FPGA DFL EMIF Driver" > > + depends on FPGA_DFL && HAS_IOMEM > > + help > > + This driver is for the EMIF private feature implemented under > > + FPGA Device Feature List (DFL) framework. It is used to expose > > + memory interface status information as well as memory clearing > > + control. > > + > > config MVEBU_DEVBUS > > bool "Marvell EBU Device Bus Controller" > > default y if PLAT_ORION > > diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile > > index e71cf7b..0afbf39 100644 > > --- a/drivers/memory/Makefile > > +++ b/drivers/memory/Makefile > > @@ -39,3 +39,5 @@ $(obj)/ti-emif-asm-offsets.h: $(obj)/emif-asm-offsets.s > > FORCE > > > > targets += emif-asm-offsets.s > > clean-files += ti-emif-asm-offsets.h > > + > > +obj-$(CONFIG_FPGA_DFL_EMIF) += dfl-emif.o > > It there is going to be a resend: this as well has to go next to > CONFIG_TI_EMIF_SRAM. > > Otherwise I will fix it up while applying.
This patch depends on latest fpga/dfl changes which I see are mixed with other changes on FPGA drivers tree so they cannot be provided independently from others as a stable tag. Unless Moritz can rebase his tree and put them on separate branch. Your "Modularization of DFL private feature drivers" should be sent along with this here, so all the maintainers see the dependencies and they can apply things for cross-merging at the beginning of the process. Therefore please send a v3 of this patch with the fix above and let's apply it via Moritz's tree. Best regards, Krzysztof
