The LCD clock dividers are apparently based on one. No datasheet, determined empirically, but seems to be confirmed by line 19 of lcd.fth in OLPC laptop's Open Firmware [1]:
h# 00000700 value pmua-disp-clk-sel \ PLL1 / 7 -> 113.86 MHz [1] https://raw.githubusercontent.com/quozl/openfirmware/65a08a73b2cac/cpu/arm/olpc/lcd.fth Signed-off-by: Lubomir Rintel <[email protected]> --- drivers/clk/mmp/clk-of-mmp2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c index 67208aea94c5c..0839fb2049e94 100644 --- a/drivers/clk/mmp/clk-of-mmp2.c +++ b/drivers/clk/mmp/clk-of-mmp2.c @@ -347,9 +347,9 @@ static struct mmp_param_mux_clk mmp3_apmu_mux_clks[] = { }; static struct mmp_param_div_clk apmu_div_clks[] = { - {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock}, + {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, CLK_DIVIDER_ONE_BASED, &disp0_lock}, {0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock}, - {0, "disp1_div", "disp1_mux", CLK_SET_RATE_PARENT, APMU_DISP1, 8, 4, 0, &disp1_lock}, + {0, "disp1_div", "disp1_mux", CLK_SET_RATE_PARENT, APMU_DISP1, 8, 4, CLK_DIVIDER_ONE_BASED, &disp1_lock}, {0, "ccic0_sphy_div", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock}, {0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock}, }; -- 2.26.2
