According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().

Signed-off-by: Christian Eggers <[email protected]>
Cc: [email protected]
---
 drivers/i2c/busses/i2c-imx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 0ab5381aa012..34648df7f1a6 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -424,7 +424,12 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct 
*i2c_imx, int for_busy, bool a
 
                /* check for arbitration lost */
                if (temp & I2SR_IAL) {
-                       temp &= ~I2SR_IAL;
+                       /*
+                        * i2sr_clr_opcode is the value to clear all interrupts.
+                        * Here we want to clear only I2SR_IAL, so we write
+                        * ~i2sr_clr_opcode with just the I2SR_IAL bit toggled.
+                        */
+                       temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IAL;
                        imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
                        return -EAGAIN;
                }
@@ -623,8 +628,12 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
        if (temp & I2SR_IIF) {
                /* save status register */
                i2c_imx->i2csr = temp;
-               temp &= ~I2SR_IIF;
-               temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+               /*
+                * i2sr_clr_opcode is the value to clear all interrupts.
+                * Here we want to clear only I2SR_IIF, so we write
+                * ~i2sr_clr_opcode with just the I2SR_IIF bit toggled.
+                */
+               temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IIF;
                imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
                wake_up(&i2c_imx->queue);
                return IRQ_HANDLED;
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: 
HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: 
HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; 
Markus Zeiler

Reply via email to