On Mon, Nov 26, 2007 at 06:56:42PM -0400, Konrad Rzeszutek wrote:
> +/*
> + * Routines for reading of the iBFT data in a human readable fashion.
> + */
> +ssize_t ibft_attr_show_initiator(struct ibft_kobject *entry,
> + struct ibft_attribute *attr,
> + char *buf)
> +{
> + struct ibft_initiator *initiator = attr->initiator;
> + void *ibft_loc = entry->data->hdr;
> + char *str = buf;
> +
> + if (!initiator)
> + return 0;
> +
> + str += sprintf_ipaddr(str, "isns", initiator->isns_server);
> + str += sprintf_ipaddr(str, "slp", initiator->slp_server);
> + str += sprintf_ipaddr(str, "primary_radius_server",
> + initiator->pri_radius_server);
> + str += sprintf_ipaddr(str, "secondary_radius_server",
> + initiator->sec_radius_server);
> + str += sprintf_string(str, "itname", initiator->initiator_name_len,
> + (char *)ibft_loc + initiator->initiator_name_off);
> + str--;
> +
> + return str-buf;
> +}
sysfs files have ONE VALUE PER FILE, not a whole bunch of different
things in a single file. Please fix this.
> +
> +ssize_t ibft_attr_show_nic(struct ibft_kobject *entry,
> + struct ibft_attribute *attr,
> + char *buf)
> +{
> + struct ibft_nic *nic = attr->nic;
> + void *ibft_loc = entry->data->hdr;
> + char *str = buf;
> +
> + if (!nic)
> + return 0;
> + /*
> + * Assume dhcp if any non-zero portions of its address are set.
> + */
> + if (memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) {
> + str += sprintf_ipaddr(str, "dhcp", nic->dhcp);
> + } else {
> + str += sprintf_ipaddr(str, "ciaddr", nic->ip_addr);
> + str += sprintf_ipaddr(str, "giaddr", nic->gateway);
> + str += sprintf_ipaddr(str, "dnsaddr1", nic->primary_dns);
> + str += sprintf_ipaddr(str, "dnsaddr2", nic->secondary_dns);
> + }
> + if (nic->hostname_len)
> + str += sprintf_string(str, "hostname", nic->hostname_len,
> + (char *)ibft_loc + nic->hostname_off);
> + /* Cut off the comma. */
> + str--;
> +
> + return str-buf;
> +}
Same here.
> +ssize_t ibft_attr_show_target(struct ibft_kobject *entry,
> + struct ibft_attribute *attr,
> + char *buf)
> +{
> + struct ibft_tgt *tgt = attr->tgt;
> + void *ibft_loc = entry->data->hdr;
> + char *str = buf;
> + int i;
> +
> + if (!tgt)
> + return 0;
> +
> + str += sprintf_ipaddr(str, "siaddr", tgt->ip_addr);
> + str += sprintf(str, "iport=%d,", tgt->port);
> + str += sprintf(str, "ilun=");
> + for (i = 0; i < 8; i++)
> + str += sprintf(str, "%x", (u8)tgt->lun[i]);
> + str += sprintf(str, ",");
> +
> + if (tgt->tgt_name_len)
> + str += sprintf_string(str, "iname", tgt->tgt_name_len,
> + (void *)ibft_loc + tgt->tgt_name_off);
> +
> + if (tgt->chap_name_len)
> + str += sprintf_string(str, "chapid", tgt->chap_name_len,
> + (char *)ibft_loc + tgt->chap_name_off);
> + if (tgt->chap_secret_len)
> + str += sprintf_string(str, "chappw", tgt->chap_secret_len,
> + (char *)ibft_loc + tgt->chap_secret_off);
> + if (tgt->rev_chap_name_len)
> + str += sprintf_string(str, "ichapid", tgt->rev_chap_name_len,
> + (char *)ibft_loc + tgt->rev_chap_name_off);
> + if (tgt->rev_chap_secret_len)
> + str += sprintf_string(str, "ichappw", tgt->rev_chap_secret_len,
> + (char *)ibft_loc + tgt->rev_chap_secret_off);
> +
> + /* Cut off the comma. */
> + str--;
> +
> + return str-buf;
> +}
Same here, are we writing a novella or something to userspace? :)
> +ssize_t ibft_attr_show_disk(struct ibft_kobject *dev,
> + struct ibft_attribute *ibft_attr,
> + char *buf)
> +{
> + char *str = buf;
> +
> + str += sprintf(str, "//[EMAIL PROTECTED],%d:iscsi,", dev->data->index);
> + str += ibft_attr_show_initiator(dev, ibft_attr, str);
> + str += sprintf(str, ",");
> + str += ibft_attr_show_target(dev, ibft_attr, str);
> + str += sprintf(str, ",");
> + str += ibft_attr_show_nic(dev, ibft_attr, str);
> +
> + return str-buf;
> +}
And here, do I need to go on?
> +ssize_t ibft_attr_show_mac(struct ibft_kobject *entry,
> + struct ibft_attribute *attr,
> + char *buf)
> +{
> + struct ibft_nic *nic = attr->nic;
> + int len = 6;
> +
> + if (!nic)
> + return 0;
> +
> + memcpy(buf, attr->nic->mac, len);
> +
> + return len;
> +}
Is mac a user readable string? Then perhaps a simple sprintf would work
instead, as I doubt you are including a \n here...
> +/*
> + * The main routine which allows the user to read the IBFT data.
> + */
> +static ssize_t ibft_show_attribute(struct kobject *kobj,
> + struct attribute *attr,
> + char *buf)
> +{
> + struct ibft_kobject *dev =
> + container_of(kobj, struct ibft_kobject, kobj);
> + struct ibft_attribute *ibft_attr =
> + container_of(attr, struct ibft_attribute, attr);
> + ssize_t ret = -EIO;
> + char *str = buf;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return -EACCES;
> +
> + if (ibft_attr->show)
> + ret = ibft_attr->show(dev, ibft_attr, str);
> +
> + return ret;
> +}
> +
> +static struct sysfs_ops ibft_attr_ops = {
> + .show = ibft_show_attribute,
> +};
I think this whole mess can go away in the new rework Kay and I have
done, please document this whole thing and I'll see what I can do.
> +struct ibft_control {
> + struct ibft_hdr hdr;
> + u16 extensions;
> + u16 initiator_off;
> + u16 nic0_off;
> + u16 tgt0_off;
> + u16 nic1_off;
> + u16 tgt1_off;
> +} __attribute__((__packed__));
Did we loose tabs for some reason? I'm guessing your editor is not
showing them properly, nor did you use scripts/checkpatch.pl :(
> +#if defined(CONFIG_ISCSI_IBFT) || defined(CONFIG_ISCSI_IBFT_MODULE)
> +
> +#define IBFT_SIGN "iBFT"
> +#define IBFT_SIGN_LEN 4
> +#define IBFT_START 0x80000 /* 512kB */
> +#define IBFT_END 0x100000 /* 1MB */
> +#define VGA_MEM 0xA0000 /* VGA buffer */
> +#define VGA_SIZE 0x20000 /* 132kB */
> +static ssize_t find_ibft(void)
> +{
> + unsigned long pos;
> +
> + for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
> + void *virt;
> + /* The table can't be inside the VGA BIOS reserved space,
> + * so skip that area */
> + if (pos == VGA_MEM)
> + pos += VGA_SIZE;
> + virt = phys_to_virt(pos);
> + if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
> + unsigned long *addr =
> + (unsigned long *)phys_to_virt(pos + 4);
> + unsigned int len = *addr;
> + /* if the length of the table extends past 1M,
> + * the table cannot be valid. */
> + if (pos + len <= (IBFT_END-1)) {
> + ibft_phys = (void *)pos;
> + return len;
> + }
> + }
> + }
> + return 0;
> +}
What is a function (not even an inline one) doing in a .h file?
> +enum ibft_kobject_type {
> + kobject_type_chosen,
> + kobject_type_ethernet,
> + kobject_type_target,
> + kobject_type_aliases
> +};
> +struct ibft_kobject {
> + struct ibft_data *data;
> + char name[IBFT_ISCSI_KOBJECT_MAX_LEN];
Why have this,
> + u8 type;
> + struct kobject kobj;
When the kobject itself has an unlimited size name associated with it?
> + struct list_head node;
> +};
> +
> +/*
> + * The text attributes, which can be:
> + * - local-mac-address (many of them)
> + * - property (many of them)
> + * - bootpath (one) , iscsi-diskX (many)
> + *
> +*/
> +#define IBFT_ISCSI_ATTR_DISK_NAME "iscsi-disk%d"
> +#define IBFT_ISCSI_ATTR_PROPERTY_NAME "property"
> +#define IBFT_ISCSI_ATTR_BOOTPATH_NAME "bootpath"
> +#define IBFT_ISCSI_ATTR_LOCAL_MAC_ADDRESS_NAME "local-mac-address"
> +#define IBFT_ISCSI_ATTR_MAX_LEN 18
> +
> +struct ibft_attribute {
> + struct attribute attr;
> + ssize_t (*show) (struct ibft_kobject *entry,
> + struct ibft_attribute *attr, char *buf);
> + struct ibft_initiator *initiator;
> + struct ibft_nic *nic;
> + struct ibft_tgt *tgt;
> + struct kobject *kobj;
> + char name[IBFT_ISCSI_ATTR_MAX_LEN];
Same here, an attribute already has a pointer to a name, no need to have
another one in the same structure.
> + struct list_head node;
> +};
thanks,
greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
