The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.
Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Signed-off-by: Dmitry Osipenko <[email protected]>
---
drivers/clk/tegra/clk-tegra30.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 37244a7e68c2..98923c4674bf 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1248,7 +1248,7 @@ static struct tegra_clk_init_table init_table[]
__initdata = {
{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 },
- { TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 600000000, 0 },
+ { TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
--
2.27.0
