On 11/10/20 20:37, Krzysztof Kozlowski wrote: > The Exynos clock output driver can be built as module (it does not have > to be part of core init process) for better customization. Adding a > KConfig entry allows also compile testing for build coverage. > > Signed-off-by: Krzysztof Kozlowski <[email protected]>
This needs to go through your tree due to dependencies on your previous patches, so Acked-by: Sylwester Nawrocki <[email protected]> > --- > drivers/clk/samsung/Kconfig | 10 ++++++++++ > drivers/clk/samsung/Makefile | 2 +- > drivers/clk/samsung/clk-exynos-clkout.c | 1 + > 3 files changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig > index 57d4b3f20417..b6b2cb209543 100644 > --- a/drivers/clk/samsung/Kconfig > +++ b/drivers/clk/samsung/Kconfig > @@ -19,6 +19,16 @@ config EXYNOS_AUDSS_CLK_CON > on some Exynos SoC variants. Choose M or Y here if you want to > use audio devices such as I2S, PCM, etc. > > +config EXYNOS_CLK_OUT Perhaps change it EXYNOS_CLKOUT for a better match with the SoC documentation? > + tristate "Samsung Exynos clock output driver" > + depends on COMMON_CLK_SAMSUNG > + default y if ARCH_EXYNOS > + help > + Support for the clock output (XCLKOUT) driver present on some of > + Exynos SoC variants. Usually the XCLKOUT is used to monitor the > + status of the certains clocks from SoC, but it could also be tied to > + other devices as an input clock. > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile > index 1a4e6b787978..4adbf972e9f6 100644 > --- a/drivers/clk/samsung/Makefile > +++ b/drivers/clk/samsung/Makefile > @@ -15,7 +15,7 @@ obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o > obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5-subcmu.o > obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o > obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o > -obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o > +obj-$(CONFIG_EXYNOS_CLK_OUT) += clk-exynos-clkout.o -- Regards, Sylwester
