Re: [PATCH 1/1] ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151

[Alexandre Torgue]

Hi Amélie

On 11/10/20 2:10 PM, Amelie Delaunay wrote:

Defaut use case on stm32mp151 USB OTG is ethernet gadget, using EP1 bulk
endpoint (MPS=512 bytes) and EP2 interrupt endpoint (MPS=16 bytes).
This patch optimizes USB OTG FIFO sizes accordingly.

Signed-off-by: Amelie Delaunay <amelie.delau...@st.com>
---
  arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi 
b/arch/arm/boot/dts/stm32mp151.dtsi
index 6ffcf06dc0e8..928e31db1526 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1070,9 +1070,9 @@
                        resets = <&rcc USBO_R>;
                        reset-names = "dwc2";
                        interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-                       g-rx-fifo-size = <256>;
+                       g-rx-fifo-size = <512>;
                        g-np-tx-fifo-size = <32>;
-                       g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+                       g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
                        dr_mode = "otg";
                        usb33d-supply = <&usb33>;
                        status = "disabled";

Applied on stm32-next.

Thanks.
Alex