[PATCH 3/3] ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host

[cristian.birsan]

From: Cristian Birsan <cristian.bir...@microchip.com>

The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.

Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d3_xplained.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts 
b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index cf13632edd44..5179258f9247 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -242,6 +242,11 @@ pinctrl_usba_vbus: usba_vbus {
                                                atmel,pins =
                                                        <AT91_PIOE 9 
AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;   /* PE9, conflicts with A9 */
                                        };
+                                       pinctrl_usb_default: usb_default {
+                                               atmel,pins =
+                                                       <AT91_PIOE 3 
AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+                                                        AT91_PIOE 4 
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
                                };
                        };
                };
@@ -259,6 +264,8 @@ usb1: ohci@600000 {
                                           &pioE 3 GPIO_ACTIVE_LOW
                                           &pioE 4 GPIO_ACTIVE_LOW
                                          >;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb_default>;
                        status = "okay";
                };
 
-- 
2.25.1