Hi!
Dne petek, 18. december 2020 ob 20:50:33 CET je Paul Kocialkowski napisal(a):
> This adds a device-tree definition for the CSI0 MCLK pin,
> which can be used for feeding MIPI CSI-2 sensors.
>
> Signed-off-by: Paul Kocialkowski <[email protected]>
Is this used anywhere? Current policy is to add pin definitions only if any
user exists.
Best regards,
Jernej
> ---
> arch/arm/boot/dts/sun8i-v3s.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi
> b/arch/arm/boot/dts/sun8i-v3s.dtsi index a9f5795d4e57..bff822b9fa01 100644
> --- a/arch/arm/boot/dts/sun8i-v3s.dtsi
> +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
> @@ -337,6 +337,12 @@ pio: pinctrl@1c20800 {
> interrupt-controller;
> #interrupt-cells = <3>;
>
> + /omit-if-no-ref/
> + csi0_mclk_pin: csi0-mclk-pin {
> + pins = "PE20";
> + function = "csi_mipi";
> + };
> +
> /omit-if-no-ref/
> csi1_8bit_pins: csi1-8bit-pins {
> pins = "PE0", "PE2", "PE3",
"PE8", "PE9",
