Add bindings for qcom,sdm845-camss in order to support the camera
subsystem on SDM845.

Signed-off-by: Robert Foss <[email protected]>
---
 .../devicetree/bindings/media/qcom,camss.txt  | 51 +++++++++++++++----
 1 file changed, 40 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt 
b/Documentation/devicetree/bindings/media/qcom,camss.txt
index 498234629e21..276c5d0c25cb 100644
--- a/Documentation/devicetree/bindings/media/qcom,camss.txt
+++ b/Documentation/devicetree/bindings/media/qcom,camss.txt
@@ -9,6 +9,7 @@ Qualcomm Camera Subsystem
                - "qcom,msm8916-camss"
                - "qcom,msm8996-camss"
                - "qcom,sdm660-camss"
+               - "qcom,sdm845-camss"
 - reg:
        Usage: required
        Value type: <prop-encoded-array>
@@ -18,19 +19,21 @@ Qualcomm Camera Subsystem
        Value type: <stringlist>
        Definition: Should contain the following entries:
                - "csiphy0"
-               - "csiphy0_clk_mux"
+               - "csiphy0_clk_mux"     (not 845)
                - "csiphy1"
-               - "csiphy1_clk_mux"
-               - "csiphy2"             (8996 only)
+               - "csiphy1_clk_mux"     (not 845)
+               - "csiphy2"             (8996 & 845)
                - "csiphy2_clk_mux"     (8996 only)
+               - "csiphy3"             (845 only)
                - "csid0"
                - "csid1"
-               - "csid2"               (8996 only)
-               - "csid3"               (8996 only)
+               - "csid2"               (8996 & 845)
+               - "csid3"               (8996 & 845)
                - "ispif"
-               - "csi_clk_mux"
+               - "csi_clk_mux"         (not 845)
                - "vfe0"
-               - "vfe1"                (8996 only)
+               - "vfe1"                (8996 & 845)
+               - "vfe_lite"            (845 only)
 - interrupts:
        Usage: required
        Value type: <prop-encoded-array>
@@ -41,14 +44,16 @@ Qualcomm Camera Subsystem
        Definition: Should contain the following entries:
                - "csiphy0"
                - "csiphy1"
-               - "csiphy2"             (8996 only)
+               - "csiphy2"             (8996 & 845)
+               - "csiphy3"             (845 only)
                - "csid0"
                - "csid1"
-               - "csid2"               (8996 only)
+               - "csid2"               (8996 & 845)
                - "csid3"               (8996 only)
                - "ispif"
                - "vfe0"
-               - "vfe1"                (8996 only)
+               - "vfe1"                (8996 & 845)
+               - "vfe_lite"            (845 only)
 - power-domains:
        Usage: required
        Value type: <prop-encoded-array>
@@ -67,27 +72,40 @@ Qualcomm Camera Subsystem
                - "top_ahb"
                - "throttle_axi"        (660 only)
                - "ispif_ahb"
+               - "camnoc_axi"          (845 only)
+               - "cpas_ahb"            (845 only)
+               - "cphy_rx_src"         (856 only)
                - "csiphy0_timer"
+               - "csiphy0"             (845 only)
+               - "csiphy0_timer_src"   (845 only)
                - "csiphy1_timer"
-               - "csiphy2_timer"       (8996 only)
+               - "csiphy2"             (845 only)
+               - "csiphy2_timer_src"   (845 only)
+               - "csiphy2_timer"       (8996 & 845)
+               - "csiphy3"             (845 only)
+               - "csiphy3_timer_src"   (845 only)
+               - "csiphy3_timer"       (845 only)
                - "csiphy_ahb2crif"     (660 only)
                - "csi0_ahb"
                - "csi0"
                - "csi0_phy"
                - "csi0_pix"
                - "csi0_rdi"
+               - "csi0_src"            (845 only)
                - "cphy_csid0"          (660 only)
                - "csi1_ahb"
                - "csi1"
                - "csi1_phy"
                - "csi1_pix"
                - "csi1_rdi"
+               - "csi1_src"            (845 only)
                - "cphy_csid1"          (660 only)
                - "csi2_ahb"            (8996 only)
                - "csi2"                (8996 only)
                - "csi2_phy"            (8996 only)
                - "csi2_pix"            (8996 only)
                - "csi2_rdi"            (8996 only)
+               - "csi2_src"            (845 only)
                - "cphy_csid2"          (660 only)
                - "csi3_ahb"            (8996 only)
                - "csi3"                (8996 only)
@@ -96,14 +114,25 @@ Qualcomm Camera Subsystem
                - "csi3_rdi"            (8996 only)
                - "cphy_csid3"          (660 only)
                - "ahb"
+               - "slow_ahb_src"        (845 only)
+               - "soc_ahb"             (845 only)
                - "vfe0"
                - "csi_vfe0"
                - "vfe0_ahb",           (8996 only)
+               - "vfe0_cphy_rx"        (845 only)
+               - "vfe0_axi",           (845 only)
+               - "vfe0_src",           (845 only)
                - "vfe0_stream",        (8996 only)
                - "vfe1",               (8996 only)
                - "csi_vfe1",           (8996 only)
                - "vfe1_ahb",           (8996 only)
+               - "vfe1_cphy_rx"        (845 only)
+               - "vfe1_axi",           (845 only)
+               - "vfe1_src",           (845 only)
                - "vfe1_stream",        (8996 only)
+               - "vfe_lite_axi",       (845 only)
+               - "vfe_lite_cphy_rx"    (845 only)
+               - "vfe_lite_src",       (845 only)
                - "vfe_ahb"
                - "vfe_axi"
 - vdda-supply:
-- 
2.27.0

Reply via email to