PHYs on the subboard could not be reached via remote access. But this is the latest DTS snipplet with some fixes suggested by Geert as a starting point. Not for upstream yet!
Signed-off-by: Wolfram Sang <[email protected]> --- Change since v1: * new patch * removed rxc-skew-ps property * renamed phy-addresses to 0 ('@0') * dropped '_tx' suffix from 'pins_mii' config * added 'okay' status * moved entries to Falcon CPU dtsi .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 160 ++++++++++++++++++ 1 file changed, 160 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index f96b03f39787..0059381443f6 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -50,6 +50,81 @@ phy0: ethernet-phy@0 { }; }; +&avb1 { + pinctrl-0 = <&avb1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy1: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; + }; +}; + +&avb2 { + pinctrl-0 = <&avb2_pins>; + pinctrl-names = "default"; + phy-handle = <&phy2>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy2: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + }; +}; + +&avb3 { + pinctrl-0 = <&avb3_pins>; + pinctrl-names = "default"; + phy-handle = <&phy3>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy3: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio7>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + }; +}; + +&avb4 { + pinctrl-0 = <&avb4_pins>; + pinctrl-names = "default"; + phy-handle = <&phy4>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy4: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio8>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>; + }; +}; + +&avb5 { + pinctrl-0 = <&avb5_pins>; + pinctrl-names = "default"; + phy-handle = <&phy5>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy5: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio9>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -133,6 +208,91 @@ pins_mii { }; + avb1_pins: avb1 { + mux { + groups = "avb1_link", "avb1_mdio", "avb1_rgmii", "avb1_txcrefclk"; + function = "avb1"; + }; + + pins_mdio { + groups = "avb1_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb1_rgmii"; + drive-strength = <21>; + }; + }; + + avb2_pins: avb2 { + mux { + groups = "avb2_link", "avb2_mdio", "avb2_rgmii", "avb2_txcrefclk"; + function = "avb2"; + }; + + pins_mdio { + groups = "avb2_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb2_rgmii"; + drive-strength = <21>; + }; + }; + + avb3_pins: avb3 { + mux { + groups = "avb3_link", "avb3_mdio", "avb3_rgmii", "avb3_txcrefclk"; + function = "avb3"; + }; + + pins_mdio { + groups = "avb3_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb3_rgmii"; + drive-strength = <21>; + }; + }; + + avb4_pins: avb4 { + mux { + groups = "avb4_link", "avb4_mdio", "avb4_rgmii", "avb4_txcrefclk"; + function = "avb4"; + }; + + pins_mdio { + groups = "avb4_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb4_rgmii"; + drive-strength = <21>; + }; + }; + + avb5_pins: avb5 { + mux { + groups = "avb5_link", "avb5_mdio", "avb5_rgmii", "avb5_txcrefclk"; + function = "avb5"; + }; + + pins_mdio { + groups = "avb5_mdio"; + drive-strength = <21>; + }; + + ins_mii { + groups = "avb5_rgmii"; + drive-strength = <21>; + }; + }; + i2c0_pins: i2c0 { groups = "i2c0"; function = "i2c0"; -- 2.29.2
