[+cc Alex, Murali, Kishon] On Tue, Jan 12, 2021 at 03:36:43PM +0000, Antti Järvinen wrote: > TI C667X does not support bus/hot reset. > See https://e2e.ti.com/support/processors/f/791/t/954382
You can cite the URL as the source, but the URL will eventually become stale, so let's include the relevant details here directly. >From the forum, it looks like the device doesn't respond after a reset (config accesses return ~0). It seems somewhat surprising that something as basic as a reset would be completely broken. I wonder if we're not doing the reset correctly. It looks like we would probably be trying a Secondary Bus Reset using the bridge leading to the C667X. Can you confirm? Wonder if you could try doing what pci_reset_secondary_bus() does by hand: # BRIDGE=... # PCI address, e.g., 00:1c.0 # C667X=... # setpci -s$C667X VENDOR_ID.w # setpci -s$BRIDGE BRIDGE_CONTROL.w # prints "val" # setpci -s$BRIDGE BRIDGE_CONTROL.w= # val | 0x40 (set SBR) # sleep 1 # setpci -s$BRIDGE BRIDGE_CONTROL.w= # val (clear SBR) # sleep 1 # setpci -s$C667X VENDOR_ID.w=0 # setpci -s$C667X VENDOR_ID.w If we use this quirk and avoid the reset, I assume that means assigning the device to VMs with VFIO will leak state between VMs? > Signed-off-by: Antti Järvinen <antti.jarvi...@gmail.com> > --- > drivers/pci/quirks.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 653660e3ba9e..c8fcf24c5bd0 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -3578,6 +3578,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, > 0x0034, quirk_no_bus_reset); > */ > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset); > > +/* > + * Some TI keystone C667X devices do no support bus/hot reset. > + * https://e2e.ti.com/support/processors/f/791/t/954382 > + */ > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset); > + > static void quirk_no_pm_reset(struct pci_dev *dev) > { > /* > -- > 2.17.1 >
