On 1/30/21 11:54 PM, Lukas Bulwahn wrote:
> Commit 90b0f71d62df ("hwmon: (pmbus/max16601) Determine and use number of
> populated phases") adjusts content in the table of
> ./Documentation/hwmon/max16601.rst, but one row went beyond the column's
> length.
>
> Hence, make htmldocs warns:
>
> Documentation/hwmon/max16601.rst:94: WARNING: Malformed table.
>
> Adjust the column length of that table for this longer row to fit.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulw...@gmail.com>
> ---
> applies cleanly on next-20210129
>
> Guenter, please pick this minor fixup for your hwmon-next tree.
I already made the same change and squashed it into the original patch.
Thanks,
Guenter
>
> Documentation/hwmon/max16601.rst | 143 +++++++++++++++----------------
> 1 file changed, 71 insertions(+), 72 deletions(-)
>
> diff --git a/Documentation/hwmon/max16601.rst
> b/Documentation/hwmon/max16601.rst
> index d16792be7533..d265a2224354 100644
> --- a/Documentation/hwmon/max16601.rst
> +++ b/Documentation/hwmon/max16601.rst
> @@ -53,75 +53,74 @@ Sysfs entries
>
> The following attributes are supported.
>
> -=======================
> =======================================================
> -in1_label "vin1"
> -in1_input VCORE input voltage.
> -in1_alarm Input voltage alarm.
> -
> -in2_label "vout1"
> -in2_input VCORE output voltage.
> -in2_alarm Output voltage alarm.
> -
> -curr1_label "iin1"
> -curr1_input VCORE input current, derived from duty cycle and output
> - current.
> -curr1_max Maximum input current.
> -curr1_max_alarm Current high alarm.
> -
> -curr[P+2]_label "iin1.P"
> -curr[P+2]_input VCORE phase P input current.
> -
> -curr[N+2]_label "iin2"
> -curr[N+2]_input VCORE input current, derived from sensor
> element.
> - 'N' is the number of enabled/populated phases.
> -
> -curr[N+3]_label "iin3"
> -curr[N+3]_input VSA input current.
> -
> -curr[N+4]_label "iout1"
> -curr[N+4]_input VCORE output current.
> -curr[N+4]_crit Critical output current.
> -curr[N+4]_crit_alarm Output current critical alarm.
> -curr[N+4]_max Maximum output current.
> -curr[N+4]_max_alarm Output current high alarm.
> -
> -curr[N+P+5]_label "iout1.P"
> -curr[N+P+5]_input VCORE phase P output current.
> -
> -curr[2*N+5]_label "iout3"
> -curr[2*N+5]_input VSA output current.
> -curr[2*N+5]_highest Historical maximum VSA output current.
> -curr[2*N+5]_reset_history
> - Write any value to reset curr21_highest.
> -curr[2*N+5]_crit Critical output current.
> -curr[2*N+5]_crit_alarm Output current critical alarm.
> -curr[2*N+5]_max Maximum output current.
> -curr[2*N+5]_max_alarm Output current high alarm.
> -
> -power1_label "pin1"
> -power1_input Input power, derived from duty cycle and output current.
> -power1_alarm Input power alarm.
> -
> -power2_label "pin2"
> -power2_input Input power, derived from input current sensor.
> -
> -power3_label "pout"
> -power3_input Output power.
> -
> -temp1_input VCORE temperature.
> -temp1_crit Critical high temperature.
> -temp1_crit_alarm Chip temperature critical high alarm.
> -temp1_max Maximum temperature.
> -temp1_max_alarm Chip temperature high alarm.
> -
> -temp2_input TSENSE_0 temperature
> -temp3_input TSENSE_1 temperature
> -temp4_input TSENSE_2 temperature
> -temp5_input TSENSE_3 temperature
> -
> -temp6_input VSA temperature.
> -temp6_crit Critical high temperature.
> -temp6_crit_alarm Chip temperature critical high alarm.
> -temp6_max Maximum temperature.
> -temp6_max_alarm Chip temperature high alarm.
> -=======================
> =======================================================
> +=========================
> =======================================================
> +in1_label "vin1"
> +in1_input VCORE input voltage.
> +in1_alarm Input voltage alarm.
> +
> +in2_label "vout1"
> +in2_input VCORE output voltage.
> +in2_alarm Output voltage alarm.
> +
> +curr1_label "iin1"
> +curr1_input VCORE input current, derived from duty cycle and
> output
> + current.
> +curr1_max Maximum input current.
> +curr1_max_alarm Current high alarm.
> +
> +curr[P+2]_label "iin1.P"
> +curr[P+2]_input VCORE phase P input current.
> +
> +curr[N+2]_label "iin2"
> +curr[N+2]_input VCORE input current, derived from sensor
> element.
> + 'N' is the number of enabled/populated phases.
> +
> +curr[N+3]_label "iin3"
> +curr[N+3]_input VSA input current.
> +
> +curr[N+4]_label "iout1"
> +curr[N+4]_input VCORE output current.
> +curr[N+4]_crit Critical output current.
> +curr[N+4]_crit_alarm Output current critical alarm.
> +curr[N+4]_max Maximum output current.
> +curr[N+4]_max_alarm Output current high alarm.
> +
> +curr[N+P+5]_label "iout1.P"
> +curr[N+P+5]_input VCORE phase P output current.
> +
> +curr[2*N+5]_label "iout3"
> +curr[2*N+5]_input VSA output current.
> +curr[2*N+5]_highest Historical maximum VSA output current.
> +curr[2*N+5]_reset_history Write any value to reset curr21_highest.
> +curr[2*N+5]_crit Critical output current.
> +curr[2*N+5]_crit_alarm Output current critical alarm.
> +curr[2*N+5]_max Maximum output current.
> +curr[2*N+5]_max_alarm Output current high alarm.
> +
> +power1_label "pin1"
> +power1_input Input power, derived from duty cycle and output
> current.
> +power1_alarm Input power alarm.
> +
> +power2_label "pin2"
> +power2_input Input power, derived from input current sensor.
> +
> +power3_label "pout"
> +power3_input Output power.
> +
> +temp1_input VCORE temperature.
> +temp1_crit Critical high temperature.
> +temp1_crit_alarm Chip temperature critical high alarm.
> +temp1_max Maximum temperature.
> +temp1_max_alarm Chip temperature high alarm.
> +
> +temp2_input TSENSE_0 temperature
> +temp3_input TSENSE_1 temperature
> +temp4_input TSENSE_2 temperature
> +temp5_input TSENSE_3 temperature
> +
> +temp6_input VSA temperature.
> +temp6_crit Critical high temperature.
> +temp6_crit_alarm Chip temperature critical high alarm.
> +temp6_max Maximum temperature.
> +temp6_max_alarm Chip temperature high alarm.
> +=========================
> =======================================================
>
