On Tuesday 26 January 2021 10:06:06 Pali Rohár wrote: > On Tuesday 26 January 2021 04:27:37 Yoshihiro Shimoda wrote: > > Hi Pali, > > > > I can see the benefit in this. > > > > In the xhci-plat case usb_create_hcd and usb_add_hcd are separate > > > > steps, and > > > > we could both copy the xhci_plat_priv .quirks and run the .init_qurks > > > > before > > > > adding the hcd. > > > > I guess the current way is inherited from pci case where the earliest > > > > place > > > > to do this after hcd is created is the hcd->driver->reset callback > > > > (which is > > > > set to xhci_pci_setup() or xhci_plat_setup()). > > > > > > > > xhci-rcar.c is using the .init_quirk to load firmware, we need to check > > > > with > > > > them if this change is ok. (added Yoshihiro Shimoda to cc) > > > > > > Yoshihiro, is this change OK? > > > > > > Can we move forward? I really need to now how to handle regression in > > > xhci-mvebu driver. And one option is with this patch... > > > > Thank you for asking me about this topic. I tested the patch, but > > unfortunately, > > this patch is possible to break a rcar platform because a phy > > initialization is > > needed before the firmware loading if the platform uses the phy. (Note that > > upstream code (salvator-common.dtsi) doesn't use the phy for xhci. But, > > if we use the phy on other board with this patch, the xhci will not work.) > > > > So, I think we need to add a new function pointer for your case. > > Ok, thank you for testing! I will try to come up with other solution to > mentioned mvebu-xhci issue.
Hello! New version of this patch is in following thread, please review it: "[PATCH v2] usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" https://lore.kernel.org/linux-usb/20210201150803.7305-1-p...@kernel.org/ > > Best regards, > > Yoshihiro Shimoda > > > > > > Their firmware would be loaded before phy parts are initialized, usb bus > > > > registered, or roothub device allocated. > > > > > > > > Thanks > > > > -Mathias
