On 02/03/21 01:10PM, Vignesh Raghavendra wrote:
>
>
> On 3/2/21 1:28 AM, Pratyush Yadav wrote:
> > +
> > + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
> > + pinctrl-single,pins = <
> > + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /*
> > MCU_OSPI0_CLK */
> > + J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /*
> > MCU_OSPI0_CSn0 */
> > + J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0
> > */
> > + J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1
> > */
> > + J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2
> > */
> > + J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3
> > */
> > + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4
> > */
> > + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5
> > */
> > + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6
> > */
> > + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7
> > */
> > + J721E_WKUP_IOPAD(0x0008, PIN_INPUT_PULLDOWN, 0) /*
> > MCU_OSPI0_DQS */
> > + >;
> > + };
>
> There is a pulldown resistor on the board right? So, internal pulldown
> is unnecessary and may even cause conflicts.
Right. Will fix.
--
Regards,
Pratyush Yadav
Texas Instruments Inc.
