Hi!

> From: Hermes Zhang <[email protected]>
> 
> Introduce a new Dual GPIO LED driver. These two GPIOs LED will act as
> one LED as normal GPIO LED but give the possibility to change the
> intensity in four levels: OFF, LOW, MIDDLE and HIGH.

Do you have hardware that uses it?

Seems reasonably sane, but:

> +config LEDS_DUAL_GPIO
> +     tristate "LED Support for Dual GPIO connected LEDs"
> +     depends on LEDS_CLASS
> +     depends on GPIOLIB || COMPILE_TEST

This will break compile, right?

Describe which hardware needs it in Kconfig.

> index 2a698df9da57..10015cc81f79 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile

Put it into leds/simple . You may need to create it.

No dts bindings etc?

> +#define GPIO_LOGICAL_ON   1
> +#define GPIO_LOGICAL_OFF  0

Let's not do that.

> +     priv = container_of(led_cdev, struct gpio_dual_leds_priv, cdev);
> +
> +     if (value == LED_FULL) {
> +             gpiod_set_value(priv->low_gpio, GPIO_LOGICAL_ON);
> +             gpiod_set_value(priv->high_gpio, GPIO_LOGICAL_ON);
> +     } else if (value < LED_FULL && value > LED_HALF) {
> +             /* Enable high only */
> +             gpiod_set_value(priv->low_gpio, GPIO_LOGICAL_OFF);
> +             gpiod_set_value(priv->high_gpio, GPIO_LOGICAL_ON);
> +     } else if (value <= LED_HALF && value > LED_OFF) {
> +             /* Enable low only */
> +             gpiod_set_value(priv->low_gpio, GPIO_LOGICAL_ON);
> +             gpiod_set_value(priv->high_gpio, GPIO_LOGICAL_OFF);
> +     } else {
> +             gpiod_set_value(priv->low_gpio, GPIO_LOGICAL_OFF);
> +             gpiod_set_value(priv->high_gpio, GPIO_LOGICAL_OFF);
> +     }
> +}

Make max brightness 4 and use logical operations to set the right
values.

> +     priv->cdev.name = of_get_property(node, "label", NULL);
> +     priv->cdev.max_brightness = LED_FULL;

= 3.


> +static const struct of_device_id of_gpio_dual_leds_match[] = {
> +     { .compatible = "gpio-dual-leds", },

Need dts docs for this.


> +MODULE_DESCRIPTION("Dual GPIO LED driver");
> +MODULE_LICENSE("GPL v2");

MODULE_AUTHOR?

GPL v2+ if you can do that easily.

Best regards,
                                                                Pavel

-- 
http://www.livejournal.com/~pavelmachek

Attachment: signature.asc
Description: PGP signature

Reply via email to