> Subject: [PATCH v6 0/5] USB: misc: Add onboard_usb_hub driver Argh, that should have been v7 :/ Not sure if it's worth/required to resend.
On Mon, Apr 05, 2021 at 01:18:12PM -0700, Matthias Kaehlcke wrote: > This series adds: > - the onboard_usb_hub_driver > - glue in the xhci-plat driver to create the onboard_usb_hub > platform device if needed > - a device tree binding for the Realtek RTS5411 USB hub controller > - device tree changes that add RTS5411 entries for the QCA SC7180 > based boards trogdor and lazor > - a couple of stubs for platform device functions to avoid > unresolved symbols with certain kernel configs > > The main issue the driver addresses is that a USB hub needs to be > powered before it can be discovered. For discrete onboard hubs (an > example for such a hub is the Realtek RTS5411) this is often solved > by supplying the hub with an 'always-on' regulator, which is kind > of a hack. Some onboard hubs may require further initialization > steps, like changing the state of a GPIO or enabling a clock, which > requires even more hacks. This driver creates a platform device > representing the hub which performs the necessary initialization. > Currently it only supports switching on a single regulator, support > for multiple regulators or other actions can be added as needed. > Different initialization sequences can be supported based on the > compatible string. > > Besides performing the initialization the driver can be configured > to power the hub off during system suspend. This can help to extend > battery life on battery powered devices which have no requirements > to keep the hub powered during suspend. The driver can also be > configured to leave the hub powered when a wakeup capable USB device > is connected when suspending, and power it off otherwise. > > Changes in v7: > - series rebased on qcom/arm64-for-5.13 > > Changes in v6: > - updated summary > > Changes in v5: > - cover letter added > > Matthias Kaehlcke (5): > dt-bindings: usb: Add binding for Realtek RTS5411 hub controller > USB: misc: Add onboard_usb_hub driver > of/platform: Add stubs for of_platform_device_create/destroy() > usb: host: xhci-plat: Create platform device for onboard hubs in > probe() > arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub > > .../sysfs-bus-platform-onboard-usb-hub | 8 + > .../bindings/usb/realtek,rts5411.yaml | 59 +++ > MAINTAINERS | 7 + > .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 19 +- > .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 11 +- > .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 +- > arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 21 +- > drivers/usb/host/xhci-plat.c | 16 + > drivers/usb/misc/Kconfig | 17 + > drivers/usb/misc/Makefile | 1 + > drivers/usb/misc/onboard_usb_hub.c | 415 ++++++++++++++++++ > include/linux/of_platform.h | 22 +- > include/linux/usb/hcd.h | 2 + > include/linux/usb/onboard_hub.h | 15 + > 14 files changed, 596 insertions(+), 36 deletions(-) > create mode 100644 > Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub > create mode 100644 Documentation/devicetree/bindings/usb/realtek,rts5411.yaml > create mode 100644 drivers/usb/misc/onboard_usb_hub.c > create mode 100644 include/linux/usb/onboard_hub.h > > -- > 2.31.0.208.g409f899ff0-goog >
