Correct misspelled words in comments of several files. Issue (largely)
detected by checkpatch.pl.

Signed-off-by: Fabio M. De Francesco <fmdefrance...@gmail.com>
---

Changes from v1: Substitute "mispelled" with "misspelled" in the Subject.

 .../rtl8723bs/include/Hal8192CPhyReg.h        |  8 ++---
 .../staging/rtl8723bs/include/basic_types.h   |  2 +-
 drivers/staging/rtl8723bs/include/drv_types.h |  2 +-
 drivers/staging/rtl8723bs/include/hal_com.h   |  2 +-
 .../staging/rtl8723bs/include/hal_com_reg.h   | 34 +++++++++----------
 drivers/staging/rtl8723bs/include/hal_data.h  |  2 +-
 .../staging/rtl8723bs/include/hal_pwr_seq.h   |  2 +-
 drivers/staging/rtl8723bs/include/rtw_cmd.h   |  6 ++--
 drivers/staging/rtl8723bs/include/rtw_mlme.h  | 18 +++++-----
 .../staging/rtl8723bs/include/rtw_mlme_ext.h  |  2 +-
 drivers/staging/rtl8723bs/include/rtw_mp.h    |  2 +-
 .../staging/rtl8723bs/include/rtw_pwrctrl.h   |  2 +-
 drivers/staging/rtl8723bs/include/rtw_recv.h  |  4 +--
 drivers/staging/rtl8723bs/include/rtw_xmit.h  |  2 +-
 drivers/staging/rtl8723bs/include/sta_info.h  |  2 +-
 drivers/staging/rtl8723bs/include/wifi.h      |  2 +-
 16 files changed, 46 insertions(+), 46 deletions(-)

diff --git a/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h 
b/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
index fb80901f0788..4b3a7c051630 100644
--- a/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
+++ b/drivers/staging/rtl8723bs/include/Hal8192CPhyReg.h
@@ -34,7 +34,7 @@
 /*--------------------------Define Parameters-------------------------------*/
 
 /*  */
-/*        8192S Regsiter offset definition */
+/*        8192S Register offset definition */
 /*  */
 
 /*  */
@@ -43,7 +43,7 @@
 /*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
 /*  3. RF register 0x00-2E */
 /*  4. Bit Mask for BB/RF register */
-/*  5. Other defintion for BB/RF R/W */
+/*  5. Other definition for BB/RF R/W */
 /*  */
 
 
@@ -137,7 +137,7 @@
 #define                rFPGA0_AnalogParameter3         0x888   /*  Useless now 
*/
 #define                rFPGA0_AnalogParameter4         0x88c
 
-#define                rFPGA0_XA_LSSIReadBack          0x8a0   /*  Tranceiver 
LSSI Readback */
+#define                rFPGA0_XA_LSSIReadBack          0x8a0   /*  Transceiver 
LSSI Readback */
 #define                rFPGA0_XB_LSSIReadBack          0x8a4
 #define                rFPGA0_XC_LSSIReadBack          0x8a8
 #define                rFPGA0_XD_LSSIReadBack          0x8ac
@@ -206,7 +206,7 @@
 #define                rOFDM0_TRSWIsolation            0xc0c
 
 #define                rOFDM0_XARxAFE                  0xc10  /* RxIQ DC 
offset, Rx digital filter, DC notch filter */
-#define                rOFDM0_XARxIQImbalance          0xc14  /* RxIQ imblance 
matrix */
+#define                rOFDM0_XARxIQImbalance          0xc14  /* RxIQ 
imbalance matrix */
 #define                rOFDM0_XBRxAFE                          0xc18
 #define                rOFDM0_XBRxIQImbalance          0xc1c
 #define                rOFDM0_XCRxAFE                          0xc20
diff --git a/drivers/staging/rtl8723bs/include/basic_types.h 
b/drivers/staging/rtl8723bs/include/basic_types.h
index 76304086107a..57bb717327ce 100644
--- a/drivers/staging/rtl8723bs/include/basic_types.h
+++ b/drivers/staging/rtl8723bs/include/basic_types.h
@@ -187,7 +187,7 @@
                ); \
 }
 
-/*  Get the N-bytes aligment offset from the current length */
+/*  Get the N-bytes alignent offset from the current length */
 #define N_BYTE_ALIGMENT(__Value, __Aligment) ((__Aligment == 1) ? (__Value) : 
(((__Value + __Aligment - 1) / __Aligment) * __Aligment))
 
 #define TEST_FLAG(__Flag, __testFlag)          (((__Flag) & (__testFlag)) != 0)
diff --git a/drivers/staging/rtl8723bs/include/drv_types.h 
b/drivers/staging/rtl8723bs/include/drv_types.h
index 19da27fb5ddf..f1f588d38a60 100644
--- a/drivers/staging/rtl8723bs/include/drv_types.h
+++ b/drivers/staging/rtl8723bs/include/drv_types.h
@@ -424,7 +424,7 @@ struct adapter {
        /*      The driver will show up the desired channel number when this 
flag is 1. */
        u8 bNotifyChannelChange;
 
-       /* pbuddystruct adapter is used only in  two inteface case, (iface_nums 
=2 in struct dvobj_priv) */
+       /* pbuddystruct adapter is used only in two interface case, (iface_nums 
=2 in struct dvobj_priv) */
        /* PRIMARY ADAPTER's buddy is SECONDARY_ADAPTER */
        /* SECONDARY_ADAPTER's buddy is PRIMARY_ADAPTER */
        /* for iface_id > SECONDARY_ADAPTER(IFACE_ID1), refer to 
padapters[iface_id]  in struct dvobj_priv */
diff --git a/drivers/staging/rtl8723bs/include/hal_com.h 
b/drivers/staging/rtl8723bs/include/hal_com.h
index a1e1b76b5d8a..6bcc443d59fb 100644
--- a/drivers/staging/rtl8723bs/include/hal_com.h
+++ b/drivers/staging/rtl8723bs/include/hal_com.h
@@ -158,7 +158,7 @@
 (rate == DESC_RATEVHTSS2MCS6) ? "VHTSS2MCS6" : \
 (rate == DESC_RATEVHTSS2MCS7) ? "VHTSS2MCS7" : \
 (rate == DESC_RATEVHTSS2MCS8) ? "VHTSS2MCS8" : \
-(rate == DESC_RATEVHTSS2MCS9) ? "VHTSS2MCS9" : "UNKNOW"
+(rate == DESC_RATEVHTSS2MCS9) ? "VHTSS2MCS9" : "UNKNOWN"
 
 
 enum{
diff --git a/drivers/staging/rtl8723bs/include/hal_com_reg.h 
b/drivers/staging/rtl8723bs/include/hal_com_reg.h
index 2cd18eb57244..b14585cb0233 100644
--- a/drivers/staging/rtl8723bs/include/hal_com_reg.h
+++ b/drivers/staging/rtl8723bs/include/hal_com_reg.h
@@ -768,14 +768,14 @@ Default: 00b.
 #define IMR_BCNDMAINT3                 BIT28           /*  Beacon DMA 
Interrupt 3 */
 #define IMR_BCNDMAINT2                 BIT27           /*  Beacon DMA 
Interrupt 2 */
 #define IMR_BCNDMAINT1                 BIT26           /*  Beacon DMA 
Interrupt 1 */
-#define IMR_BCNDOK8                            BIT25           /*  Beacon 
Queue DMA OK Interrup 8 */
-#define IMR_BCNDOK7                            BIT24           /*  Beacon 
Queue DMA OK Interrup 7 */
-#define IMR_BCNDOK6                            BIT23           /*  Beacon 
Queue DMA OK Interrup 6 */
-#define IMR_BCNDOK5                            BIT22           /*  Beacon 
Queue DMA OK Interrup 5 */
-#define IMR_BCNDOK4                            BIT21           /*  Beacon 
Queue DMA OK Interrup 4 */
-#define IMR_BCNDOK3                            BIT20           /*  Beacon 
Queue DMA OK Interrup 3 */
-#define IMR_BCNDOK2                            BIT19           /*  Beacon 
Queue DMA OK Interrup 2 */
-#define IMR_BCNDOK1                            BIT18           /*  Beacon 
Queue DMA OK Interrup 1 */
+#define IMR_BCNDOK8                            BIT25           /*  Beacon 
Queue DMA OK Interrupt 8 */
+#define IMR_BCNDOK7                            BIT24           /*  Beacon 
Queue DMA OK Interrupt 7 */
+#define IMR_BCNDOK6                            BIT23           /*  Beacon 
Queue DMA OK Interrupt 6 */
+#define IMR_BCNDOK5                            BIT22           /*  Beacon 
Queue DMA OK Interrupt 5 */
+#define IMR_BCNDOK4                            BIT21           /*  Beacon 
Queue DMA OK Interrupt 4 */
+#define IMR_BCNDOK3                            BIT20           /*  Beacon 
Queue DMA OK Interrupt 3 */
+#define IMR_BCNDOK2                            BIT19           /*  Beacon 
Queue DMA OK Interrupt 2 */
+#define IMR_BCNDOK1                            BIT18           /*  Beacon 
Queue DMA OK Interrupt 1 */
 #define IMR_TIMEOUT2                   BIT17           /*  Timeout interrupt 2 
*/
 #define IMR_TIMEOUT1                   BIT16           /*  Timeout interrupt 1 
*/
 #define IMR_TXFOVW                             BIT15           /*  Transmit 
FIFO Overflow */
@@ -784,9 +784,9 @@ Default: 00b.
 #define IMR_RXFOVW                             BIT12           /*  Receive 
FIFO Overflow */
 #define IMR_RDU                                        BIT11           /*  
Receive Descriptor Unavailable */
 #define IMR_ATIMEND                            BIT10           /*  For 92C, 
ATIM Window End Interrupt. For 8723 and later ICs, it also means P2P CTWin End 
interrupt. */
-#define IMR_BDOK                               BIT9            /*  Beacon 
Queue DMA OK Interrup */
+#define IMR_BDOK                               BIT9            /*  Beacon 
Queue DMA OK Interrupt */
 #define IMR_HIGHDOK                            BIT8            /*  High Queue 
DMA OK Interrupt */
-#define IMR_TBDOK                              BIT7            /*  Transmit 
Beacon OK interrup */
+#define IMR_TBDOK                              BIT7            /*  Transmit 
Beacon OK interrupt */
 #define IMR_MGNTDOK                    BIT6            /*  Management Queue 
DMA OK Interrupt */
 #define IMR_TBDER                              BIT5            /*  For 92C, 
Transmit Beacon Error Interrupt */
 #define IMR_BKDOK                              BIT4            /*  AC_BK DMA 
OK Interrupt */
@@ -956,13 +956,13 @@ Default: 00b.
 #define IMR_BCNDMAINT3_88E             BIT23           /*  Beacon DMA 
Interrupt 3 */
 #define IMR_BCNDMAINT2_88E             BIT22           /*  Beacon DMA 
Interrupt 2 */
 #define IMR_BCNDMAINT1_88E             BIT21           /*  Beacon DMA 
Interrupt 1 */
-#define IMR_BCNDOK7_88E                        BIT20           /*  Beacon 
Queue DMA OK Interrup 7 */
-#define IMR_BCNDOK6_88E                        BIT19           /*  Beacon 
Queue DMA OK Interrup 6 */
-#define IMR_BCNDOK5_88E                        BIT18           /*  Beacon 
Queue DMA OK Interrup 5 */
-#define IMR_BCNDOK4_88E                        BIT17           /*  Beacon 
Queue DMA OK Interrup 4 */
-#define IMR_BCNDOK3_88E                        BIT16           /*  Beacon 
Queue DMA OK Interrup 3 */
-#define IMR_BCNDOK2_88E                        BIT15           /*  Beacon 
Queue DMA OK Interrup 2 */
-#define IMR_BCNDOK1_88E                        BIT14           /*  Beacon 
Queue DMA OK Interrup 1 */
+#define IMR_BCNDOK7_88E                        BIT20           /*  Beacon 
Queue DMA OK Interrupt 7 */
+#define IMR_BCNDOK6_88E                        BIT19           /*  Beacon 
Queue DMA OK Interrupt 6 */
+#define IMR_BCNDOK5_88E                        BIT18           /*  Beacon 
Queue DMA OK Interrupt 5 */
+#define IMR_BCNDOK4_88E                        BIT17           /*  Beacon 
Queue DMA OK Interrupt 4 */
+#define IMR_BCNDOK3_88E                        BIT16           /*  Beacon 
Queue DMA OK Interrupt 3 */
+#define IMR_BCNDOK2_88E                        BIT15           /*  Beacon 
Queue DMA OK Interrupt 2 */
+#define IMR_BCNDOK1_88E                        BIT14           /*  Beacon 
Queue DMA OK Interrupt 1 */
 #define IMR_ATIMEND_E_88E                      BIT13           /*  ATIM Window 
End Extension for Win7 */
 #define IMR_TXERR_88E                          BIT11           /*  Tx Error 
Flag Interrupt Status, write 1 clear. */
 #define IMR_RXERR_88E                          BIT10           /*  Rx Error 
Flag INT Status, Write 1 clear */
diff --git a/drivers/staging/rtl8723bs/include/hal_data.h 
b/drivers/staging/rtl8723bs/include/hal_data.h
index df5c7b747498..babcb03a7c23 100644
--- a/drivers/staging/rtl8723bs/include/hal_data.h
+++ b/drivers/staging/rtl8723bs/include/hal_data.h
@@ -389,7 +389,7 @@ struct hal_com_data {
        u8 OutEpQueueSel;
        u8 OutEpNumber;
 
-       /*  2010/12/10 MH Add for USB aggreation mode dynamic shceme. */
+       /*  2010/12/10 MH Add for USB aggregation mode dynamic scheme. */
        bool            UsbRxHighSpeedMode;
 
        /*  2010/11/22 MH Add for slim combo debug mode selective. */
diff --git a/drivers/staging/rtl8723bs/include/hal_pwr_seq.h 
b/drivers/staging/rtl8723bs/include/hal_pwr_seq.h
index 0837506b6be8..0a2e60770668 100644
--- a/drivers/staging/rtl8723bs/include/hal_pwr_seq.h
+++ b/drivers/staging/rtl8723bs/include/hal_pwr_seq.h
@@ -14,7 +14,7 @@
        4: LPS--Low Power State
        5: SUS--Suspend
 
-       The transision from different states are defined below
+       The transition from different states are defined below
        TRANS_CARDEMU_TO_ACT
        TRANS_ACT_TO_CARDEMU
        TRANS_CARDEMU_TO_SUS
diff --git a/drivers/staging/rtl8723bs/include/rtw_cmd.h 
b/drivers/staging/rtl8723bs/include/rtw_cmd.h
index 87cbad525393..517ae3b51386 100644
--- a/drivers/staging/rtl8723bs/include/rtw_cmd.h
+++ b/drivers/staging/rtl8723bs/include/rtw_cmd.h
@@ -136,7 +136,7 @@ enum {
        RESET_SECURITYPRIV, /*  add for CONFIG_IEEE80211W, none 11w also can 
use */
        FREE_ASSOC_RESOURCES, /*  add for CONFIG_IEEE80211W, none 11w also can 
use */
        DM_IN_LPS_WK_CID,
-       DM_RA_MSK_WK_CID, /* add for STA update RAMask when bandwith change. */
+       DM_RA_MSK_WK_CID, /* add for STA update RAMask when bandwidth change. */
        BEAMFORMING_WK_CID,
        LPS_CHANGE_DTIM_CID,
        BTINFO_WK_CID,
@@ -514,7 +514,7 @@ struct drvextra_cmd_parm {
        unsigned char *pbuf;
 };
 
-/*------------------- Below are used for RF/BB tunning ---------------------*/
+/*------------------- Below are used for RF/BB tuning ---------------------*/
 
 struct getcountjudge_rsp {
        u8 count_judge[MAX_RATES_LENGTH];
@@ -567,7 +567,7 @@ struct RunInThread_param {
 
 Result:
 0x00: success
-0x01: sucess, and check Response.
+0x01: success, and check Response.
 0x02: cmd ignored due to duplicated sequcne number
 0x03: cmd dropped due to invalid cmd code
 0x04: reserved.
diff --git a/drivers/staging/rtl8723bs/include/rtw_mlme.h 
b/drivers/staging/rtl8723bs/include/rtw_mlme.h
index 87a1fa8f347e..5deb73fe3885 100644
--- a/drivers/staging/rtl8723bs/include/rtw_mlme.h
+++ b/drivers/staging/rtl8723bs/include/rtw_mlme.h
@@ -57,11 +57,11 @@
 
 /* ifdef UNDER_MPTEST */
 #define        WIFI_MP_STATE                                                   
0x00010000
-#define        WIFI_MP_CTX_BACKGROUND                          0x00020000      
/*  in continous tx background */
-#define        WIFI_MP_CTX_ST                                          
0x00040000      /*  in continous tx with single-tone */
-#define        WIFI_MP_CTX_BACKGROUND_PENDING  0x00080000      /*  pending in 
continous tx background due to out of skb */
-#define        WIFI_MP_CTX_CCK_HW                                      
0x00100000      /*  in continous tx */
-#define        WIFI_MP_CTX_CCK_CS                                      
0x00200000      /*  in continous tx with carrier suppression */
+#define        WIFI_MP_CTX_BACKGROUND                          0x00020000      
/*  in continuous tx background */
+#define        WIFI_MP_CTX_ST                                          
0x00040000      /*  in continuous tx with single-tone */
+#define        WIFI_MP_CTX_BACKGROUND_PENDING  0x00080000      /*  pending in 
continuous tx background due to out of skb */
+#define        WIFI_MP_CTX_CCK_HW                                      
0x00100000      /*  in continuous tx */
+#define        WIFI_MP_CTX_CCK_CS                                      
0x00200000      /*  in continuous tx with carrier suppression */
 #define   WIFI_MP_LPBK_STATE                                   0x00400000
 /* endif */
 
@@ -168,7 +168,7 @@ struct tx_provdisc_req_info {
        u8                      benable;                                        
/*      This provision discovery request frame is trigger to send or not */
 };
 
-struct rx_provdisc_req_info {  /* When peer device issue prov_disc_req first, 
we should store the following informations */
+struct rx_provdisc_req_info {  /* When peer device issue prov_disc_req first, 
we should store the following information */
        u8                      peerDevAddr[ETH_ALEN];          /*      Peer 
device address */
        u8                      strconfig_method_desc_of_prov_disc_req[4];      
/*      description for the config method located in the provisioning discovery 
request frame. */
                                                                                
                                                        /*      The UI must 
know this information to know which config method the remote p2p device is 
requiring. */
@@ -177,7 +177,7 @@ struct rx_provdisc_req_info {       /* When peer device 
issue prov_disc_req first, we
 struct tx_nego_req_info {
        u16                             peer_channel_num[2];            /*      
The channel number which the receiver stands. */
        u8                      peerDevAddr[ETH_ALEN];          /*      Peer 
device address */
-       u8                      benable;                                        
/*      This negoitation request frame is trigger to send or not */
+       u8                      benable;                                        
/*      This negotiation request frame is trigger to send or not */
 };
 
 struct group_id_info {
@@ -228,9 +228,9 @@ struct wifidirect_info {
        u8                              profileindex;   /*      Used to point 
to the index of profileinfo array */
        u8                              peer_operating_ch;
        u8                              find_phase_state_exchange_cnt;
-       u16                                     device_password_id_for_nego;    
/*      The device password ID for group negotation */
+       u16                                     device_password_id_for_nego;    
/*      The device password ID for group negotiation */
        u8                              negotiation_dialog_token;
-       u8                              nego_ssid[WLAN_SSID_MAXLEN];    /*      
SSID information for group negotitation */
+       u8                              nego_ssid[WLAN_SSID_MAXLEN];    /*      
SSID information for group negotiation */
        u8                              nego_ssidlen;
        u8                              p2p_group_ssid[WLAN_SSID_MAXLEN];
        u8                              p2p_group_ssid_len;
diff --git a/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h 
b/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h
index 393eeecaf3a0..5e6cf63956b8 100644
--- a/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h
+++ b/drivers/staging/rtl8723bs/include/rtw_mlme_ext.h
@@ -112,7 +112,7 @@ extern unsigned char WMM_PARA_OUI[];
 /*  Note: */
 /*     We just add new channel plan when the new channel plan is different 
from any of the following */
 /*     channel plan. */
-/*     If you just wnat to customize the acitions(scan period or join actions) 
about one of the channel plan, */
+/*     If you just want to customize the actions(scan period or join actions) 
about one of the channel plan, */
 /*     customize them in rt_channel_info in the RT_CHANNEL_LIST. */
 /*  */
 enum {
diff --git a/drivers/staging/rtl8723bs/include/rtw_mp.h 
b/drivers/staging/rtl8723bs/include/rtw_mp.h
index 26dec21bf0f1..2788ad80b114 100644
--- a/drivers/staging/rtl8723bs/include/rtw_mp.h
+++ b/drivers/staging/rtl8723bs/include/rtw_mp.h
@@ -101,7 +101,7 @@ struct mpt_context {
        /*  For MP Tx Power index */
        u8      TxPwrLevel[2];  /*  rf-A, rf-B */
        u32             RegTxPwrLimit;
-       /*  Content of RCR Regsiter for Mass Production Test. */
+       /*  Content of RCR Register for Mass Production Test. */
        u32             MptRCR;
        /*  true if we only receive packets with specific pattern. */
        bool                    bMptFilterPattern;
diff --git a/drivers/staging/rtl8723bs/include/rtw_pwrctrl.h 
b/drivers/staging/rtl8723bs/include/rtw_pwrctrl.h
index 5450d20b44a6..0a48f1653be5 100644
--- a/drivers/staging/rtl8723bs/include/rtw_pwrctrl.h
+++ b/drivers/staging/rtl8723bs/include/rtw_pwrctrl.h
@@ -112,7 +112,7 @@ enum rt_rf_power_state {
 #define        RT_RF_OFF_LEVL_FREE_FW          BIT(4)  /*  FW free, 
re-download the FW */
 #define        RT_RF_OFF_LEVL_FW_32K           BIT(5)  /*  FW in 32k */
 #define        RT_RF_PS_LEVEL_ALWAYS_ASPM      BIT(6)  /*  Always enable ASPM 
and Clock Req in initialization. */
-#define        RT_RF_LPS_DISALBE_2R                    BIT(30) /*  When LPS is 
on, disable 2R if no packet is received or transmittd. */
+#define        RT_RF_LPS_DISALBE_2R                    BIT(30) /*  When LPS is 
on, disable 2R if no packet is received or transmitted. */
 #define        RT_RF_LPS_LEVEL_ASPM                    BIT(31) /*  LPS with 
ASPM */
 
 #define        RT_IN_PS_LEVEL(ppsc, _PS_FLAG)          ((ppsc->cur_ps_level & 
_PS_FLAG) ? true : false)
diff --git a/drivers/staging/rtl8723bs/include/rtw_recv.h 
b/drivers/staging/rtl8723bs/include/rtw_recv.h
index d007f90d02c3..9c3cdcc990fa 100644
--- a/drivers/staging/rtl8723bs/include/rtw_recv.h
+++ b/drivers/staging/rtl8723bs/include/rtw_recv.h
@@ -132,7 +132,7 @@ struct rx_pkt_attrib        {
        u8 order;
        u8 privacy; /* in frame_ctrl field */
        u8 bdecrypted;
-       u8 encrypt; /* when 0 indicate no encrypt. when non-zero, indicate the 
encrypt algorith */
+       u8 encrypt; /* when 0 indicates no encryption; when non-zero, indicates 
the encryption algorithm */
        u8 iv_len;
        u8 icv_len;
        u8 crc_err;
@@ -227,7 +227,7 @@ struct recv_priv {
 
        struct __queue  recv_buf_pending_queue;
 
-       /* For display the phy informatiom */
+       /* For display the phy information */
        u8 is_signal_dbg;       /*  for debug */
        u8 signal_strength_dbg; /*  for debug */
 
diff --git a/drivers/staging/rtl8723bs/include/rtw_xmit.h 
b/drivers/staging/rtl8723bs/include/rtw_xmit.h
index 73d020cfd0d1..e45753d17313 100644
--- a/drivers/staging/rtl8723bs/include/rtw_xmit.h
+++ b/drivers/staging/rtl8723bs/include/rtw_xmit.h
@@ -142,7 +142,7 @@ struct pkt_attrib {
        u32 pktlen;             /* the original 802.3 pkt raw_data len (not 
include ether_hdr data) */
        u32 last_txcmdsz;
        u8 nr_frags;
-       u8 encrypt;     /* when 0 indicate no encrypt. when non-zero, indicate 
the encrypt algorith */
+       u8 encrypt;     /* when 0 indicates no encryption; when non-zero, 
indicates the encryption algorithm */
        u8 iv_len;
        u8 icv_len;
        u8 iv[18];
diff --git a/drivers/staging/rtl8723bs/include/sta_info.h 
b/drivers/staging/rtl8723bs/include/sta_info.h
index abde3e3df988..69c377eeeaf0 100644
--- a/drivers/staging/rtl8723bs/include/sta_info.h
+++ b/drivers/staging/rtl8723bs/include/sta_info.h
@@ -329,7 +329,7 @@ struct      sta_priv {
         */
        struct sta_info *sta_aid[NUM_STA];
 
-       u16 sta_dz_bitmap;/* only support 15 stations, staion aid bitmap for 
sleeping sta. */
+       u16 sta_dz_bitmap;/* only support for 15 stations, aid bitmap for 
sleeping stations. */
        u16 tim_bitmap;/* only support 15 stations, aid = 0~15 mapping 
bit0~bit15 */
 
        u16 max_num_sta;
diff --git a/drivers/staging/rtl8723bs/include/wifi.h 
b/drivers/staging/rtl8723bs/include/wifi.h
index 69e714a6d87c..036cf57c65a9 100644
--- a/drivers/staging/rtl8723bs/include/wifi.h
+++ b/drivers/staging/rtl8723bs/include/wifi.h
@@ -678,7 +678,7 @@ struct ADDBA_request {
 
 #define        P2P_PROVISION_TIMEOUT                           5000    /*      
5 seconds timeout for sending the provision discovery request */
 #define        P2P_CONCURRENT_PROVISION_TIMEOUT        3000    /*      3 
seconds timeout for sending the provision discovery request under concurrent 
mode */
-#define        P2P_GO_NEGO_TIMEOUT                                     5000    
/*      5 seconds timeout for receiving the group negotation response */
+#define        P2P_GO_NEGO_TIMEOUT                                     5000    
/*      5 seconds timeout for receiving the group negotiation response */
 #define        P2P_CONCURRENT_GO_NEGO_TIMEOUT          3000    /*      3 
seconds timeout for sending the negotiation request under concurrent mode */
 #define        P2P_TX_PRESCAN_TIMEOUT                          100             
/*      100ms */
 #define        P2P_INVITE_TIMEOUT                                      5000    
/*      5 seconds timeout for sending the invitation request */
-- 
2.31.1

Reply via email to