From: Gabriel Fernandez <gabriel.fernan...@foss.st.com> Platform STM32MP1 can be used in configuration where some clocks and IP resets can relate as secure resources. These resources are moved from a RCC clock/reset handle to a SCMI clock/reset_domain handle.
The RCC clock driver is now dependent of the SCMI driver, then we have to manage now the probe defering. v2 -> v3: - use determine_rate op instead of round_rate for ck_rtc - remove DT patches from patchset to keek Kernel device tree as there are in basic boot. We will applied scmi clock phandle thanks dtbo in U-boot. v1 -> v2: - fix yamllint warnings. Gabriel Fernandez (11): clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock clk: stm32mp1: remove intermediate pll clocks clk: stm32mp1: convert to module driver clk: stm32mp1: move RCC reset controller into RCC clock driver reset: stm32mp1: remove stm32mp1 reset dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: clock: stm32mp1 new compatible for secure rcc clk: stm32mp1: new compatible for secure RCC support .../bindings/clock/st,stm32mp1-rcc.yaml | 6 +- drivers/clk/Kconfig | 10 + drivers/clk/clk-stm32mp1.c | 500 +++++++++++++++--- drivers/reset/Kconfig | 6 - drivers/reset/Makefile | 1 - drivers/reset/reset-stm32mp1.c | 115 ---- include/dt-bindings/clock/stm32mp1-clks.h | 27 + include/dt-bindings/reset/stm32mp1-resets.h | 15 + 8 files changed, 469 insertions(+), 211 deletions(-) delete mode 100644 drivers/reset/reset-stm32mp1.c -- 2.17.1